Water Based Anti-Corrosion Coatings for Environmentally Regulated Projects
Our water-based anti-corrosion coatings are designed to provide reliable protection for steel structures and industrial equipment while meeting modern environmental and VOC regulations.
These systems are widely used in indoor facilities, manufacturing plants, and export-oriented projects where safety, compliance, and performance are equally important.
Why Water-Based Coatings
Water-based anti-corrosion coatings offer a balanced solution between environmental compliance and industrial performance. Compared with traditional solvent-based coatings, waterborne systems significantly reduce VOC emissions while maintaining good adhesion and corrosion resistance.
Typical Applications of Water-Based Anti-Corrosion Coatings
Water-based systems are commonly specified in projects where environmental impact, indoor air quality, and compliance are critical.
Indoor steel structures (factories, warehouses, workshops)
Machinery and equipment frames
Public infrastructure with environmental requirements
Export projects subject to VOC regulations
Maintenance coating for existing steel structures
Water-Based Coating Systems
Recommended Water-Based Coating Systems
Water-Based Epoxy System
Water-Based Epoxy Primer + Water-Based Epoxy Topcoat
Excellent adhesion to steel
Good corrosion resistance
Suitable for indoor and sheltered environments
Water-Based Acrylic System
Water-Based Primer + Water-Based Acrylic Topcoat
Good decorative appearance
Fast drying
Suitable for light to medium corrosion environments
Water-Based Coating Systems
Low VOC & Environmentally Friendly
Suitable for projects with strict environmental or safety regulations.Safer for Indoor Application
Reduced odor and lower fire risk during application.Reliable Adhesion on Steel Substrates
Properly prepared steel surfaces achieve strong coating adhesion.Compatible with Multiple Coating Systems
Can be used as primer or topcoat in various anti-corrosion systems.
Technical Advantages
Compatible with steel surface preparation standards
Stable film formation and uniform coating thickness
Reduced environmental and safety risks during application
Suitable for both new construction and maintenance projects
Find the right product for your needs
Waterborne insulating dip coating for coils, windings and electrical components.
-
Motors, transformers, generators, coils and PCB assemblies.
-
0.08–0.1 kg/m² at 25 µm; 120–150℃ cure.
-
Dip-applied; high dielectric strength in dry/humid states.
Waterborne inorganic zinc-rich primer (2K) for cathodic protection of large steelwork.
-
Tanks, bridges, towers, ships and steel structures.
-
0.27 kg/m² at 50 µm; pot life 5 h.
-
Water thinning ≤5%; blast to Sa 2.5.
Waterborne alkyd enamel coating for glossy protection of outdoor steelwork.
-
Scaffolds, steel frames, machinery and fences.
-
0.14 kg/m² at 50 µm; recoat ≥24 h.
-
Water thinning ≤10%; optional 90℃ baking.
Waterborne polyurethane topcoat (2K) for durable color/gloss over waterborne epoxy.
-
Light to medium corrosive steel environments.
-
0.11 kg/m² at 40 µm; pot life 3 h.
-
Water thinning 10–20%; 2 primer + 2 topcoat.
Project Inquiry & Technical Support
Choosing the right epoxy anti-corrosion coating system is critical to project performance and durability.