- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
Single-component water-based alkyd enamel with high-gloss film, strong adhesion and corrosion resistance for scaffolding, structural steel, outdoor steel fabrications and machinery. Low-VOC, non-flammable. Sa2.5 prep, 50µm DFT per coat.
Overview
Waterborne alkyd enamel coating for outdoor steel structures and equipment where gloss, corrosion resistance, and adhesion are required.
Film focuses on fullness and gloss with good adhesion and corrosion resistance on scaffolding, steel frames, and fences.
Composition
Waterborne alkyd resin with waterborne pigments, fillers, and special additives; single-component waterborne system using water as thinner.
Typical uses
Protective and decorative coating for scaffolding, plant steel structures, outdoor steel components, machinery, metal fences, and other steel products.
Technical data (typical)
Appearance: various colors.
Density: 1.2 kg/L.
Theoretical consumption: 0.14 kg/m² at 50 µm DFT (loss not included).
Drying time (25℃): surface dry 3 h; hard dry 24 h; full cure 7 d.
Forced drying (optional): flash-off 15 min, 90℃ for 25 min.
Application data (25°C)
Application methods: spray, brush, roller.
Thinner: pure water, ≤10%.
Recoat interval: ≥24 h.
Surface preparation
On primer: all surfaces must be clean, dry, and free from contaminants; roughen if maximum recoat interval is exceeded.
As first primer: blast or power-tool clean steel to Sa 2.5 or St 3 with 30–75 µm profile.
System compatibility / packing / storage
System compatibility: finishing coat over compatible primers on outdoor steel structures and equipment.
Storage: dry, cool, ventilated warehouse; avoid strong sunlight, severe cold, and rain.
Shelf life: 6 months.
We would love to speak with you.
Feel free to reach out using the below details.
2K epoxy anti-corrosive primer that chemically reacts with surface corrosion to form a stable protective complex. Applies directly to corroded steel up to 60µm, minimizing surface preparation. Minimum 40µm DFT, universal topcoat compatibility.
Single-component epoxy ester primer engineered for anti-corrosive protection on ferrous metals. Suited for coastal and high-humidity industrial environments. Air-dry or low-temperature bake cure, 25–30µm DFT per coat.
2K epoxy MIO primer and intermediate coat with lamellar barrier structure for aggressive environments. Engineered for shipbuilding, bridges & port machinery. Single airless spray pass achieves 60–80µm DFT.
Industrial anti-corrosion and protective coating manufacturer. Direct supply from factory — no agents. ISO 9001 certified. Exporting to 30+ countries.
