- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
Single-component water-based dip coating delivering uniform film formation with minimal application loss for vehicle frames, chassis, agricultural equipment and petrochemical hardware. Low-VOC, non-flammable. Customizable resin system per production line requirement, 25µm DFT.
Overview
Waterborne dip-coating system for steel frames, chassis, and small metal components where uniform film build and adhesion are important.
Designed for immersion application with low VOC, strong adhesion, and consistent film formation on complex geometries.
Composition
Waterborne resin with pigments/fillers, special additives, and deionized water; formulated for dip-coating; water as thinner.
Typical uses
Protective coating for vehicle frames and chassis, agricultural machinery, petrochemical equipment, instruments, and hardware components applied by dipping.
Technical data (typical)
Appearance: various colors.
Density: 1.2–1.5 kg/L.
Theoretical consumption: 0.05–0.11 kg/m² at 25 µm DFT (loss not included).
Drying time: agreed according to customer production line and coating system.
Application data (25°C)
Application method: dip coating.
Thinner: clean water, added according to viscosity requirements.
Surface preparation
Workpiece surface must be clean and free from dust, oil, and other contaminants; surface conditioning or pretreatment to be carried out as required by the dip line.
System compatibility / packing / storage
System compatibility: used as part of a dip system in combination with suitable pretreatment and, if required, primer or topcoat layers.
Construction conditions: ambient 5–35℃; not suitable when RH ≥85%.
Storage: cool, ventilated storage at 5–35℃; avoid sunlight, severe cold, and rain.
Shelf life: 6 months.
We would love to speak with you.
Feel free to reach out using the below details.
2K ethyl silicate inorganic zinc-rich primer with high zinc content for maximum cathodic protection on industrial steel. Engineered for bridges, transmission towers & oil pipelines. Weld and cut tolerant, Sa2.5 prep, 40–80µm DFT.
2K epoxy glass flake coating with exceptional chemical resistance and abrasion resistance for severe corrosive environments. Engineered for offshore structures, chemical plants & wastewater facilities. Achieves up to 300µm DFT in heavy-duty applications.
2K epoxy anti-corrosive primer that chemically reacts with surface corrosion to form a stable protective complex. Applies directly to corroded steel up to 60µm, minimizing surface preparation. Minimum 40µm DFT, universal topcoat compatibility.
