- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
2K water-based polyurethane topcoat with long-term color and gloss retention for light to medium corrosive environments. Pairs with water-based epoxy primers for a complete system. Sa2.5 prep, 40µm DFT per coat.
Overview
Waterborne polyurethane topcoat for steel surfaces in light to medium corrosive environments where color/gloss retention and cleanability are important.
Film emphasizes weatherability and durability on steel structures over waterborne epoxy systems, with balanced hardness and flexibility.
Composition
Waterborne polyurethane resin with pigments, special additives, and curing agent; supplied as Part A & Part B; water as thinner.
Typical uses
Durable topcoat paired with waterborne epoxy coatings, providing decorative and protective finishing in light to medium corrosive environments.
Technical data (typical)
Appearance: various colors.
Density: 1.2 kg/L.
Theoretical consumption: 0.11 kg/m² at 40 µm DFT (loss not included).
Drying time (25℃): surface dry 2 h; hard dry 24 h; full cure 7 d.
Application data (25°C)
Application methods: spray, brush, roller.
Pot life: 3 h at 25℃.
Thinner: clean water, 10–20%.
Recoat interval: min 24 h; max 7 d.
Recommended system: 2 coats primer / 2 coats topcoat.
Surface preparation
For overcoating: remove dust, oil, and contaminants from previous coat; roughen if maximum recoat interval is exceeded.
As first coat: blast or power-tool clean steel to Sa 2.5 or St 3 with 30–75 µm profile.
System compatibility / packing / storage
System compatibility: topcoat in waterborne epoxy + polyurethane systems for steel in light to medium corrosive conditions.
Storage: dry, cool, ventilated warehouse; 5–35℃; avoid strong sunlight, severe cold, and rain.
Shelf life: 6 months.
We would love to speak with you.
Feel free to reach out using the below details.
Cementitious hydrocarbon fire-resistant coating engineered for petrochemical and oil refining facilities exposed to hydrocarbon flame. Impact-resistant and crack-resistant with outstanding weathering performance. Sa2.5 prep, 24–33mm total application thickness.
Cementitious non-intumescent fire-resistant coating with 3-hour fire rating for indoor steel structures including stations, warehouses and stadiums. Non-corrosive to steel, smoke-free and non-toxic. Sa2.5 prep, 16–32mm total application thickness.
2K modified epoxy iron oxide primer with enhanced water resistance and corrosion protection for steel and concrete. Compatible with polyurethane, acrylic & chlorinated rubber topcoats. Abrasion-resistant film, high adhesion, 35–40µm DFT.
Industrial anti-corrosion and protective coating manufacturer. Direct supply from factory — no agents. ISO 9001 certified. Exporting to 30+ countries.
