- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
Single-component water-based fluorocarbon coating with outstanding UV resistance and long-term color and gloss retention for building exteriors and roofing. Low-VOC, non-flammable formulation. Surface dry in 1.5 hours, 50µm DFT per coat.
Overview
Waterborne fluorocarbon coating for exterior concrete and building materials where long-term weatherability and color/gloss retention are critical.
Suitable for building walls and roofs requiring durable decorative protection with easy-to-clean, low-VOC film.
Composition
Fluorocarbon emulsion as main binder with pigments, fillers, and additives; single-component waterborne system using water as thinner.
Typical uses
Super-durable decorative and protective coating for various building exterior walls, roofs, and construction materials, significantly extending building service life.
Technical data (typical)
Appearance: various colors.
Theoretical consumption: 0.15 kg/m² at 50 µm DFT (loss not included).
Drying time (25℃): surface dry 1.5 h; hard dry 24 h; full cure 7 d.
Application data (25°C)
Application methods: spray, brush, roller.
Thinner: clean water, 5–10%.
Recoat interval: ≥2 h.
Recommended system: 1 primer coat / 2 topcoats.
Surface preparation
Substrate surface must be clean, dry, flat, and sound; concrete moisture content ≤8% and pH ≤10.
System compatibility / packing / storage
System compatibility: applied over appropriate primers and putty systems for exterior concrete and building panels.
Storage: dry, cool, ventilated warehouse; 5–35℃; avoid strong sunlight; strictly no outdoor stacking.
Shelf life: 12 months.
We would love to speak with you.
Feel free to reach out using the below details.
Single-component water-based intumescent coating delivering a 2-hour fire rating for indoor steel structures and building frames. Non-toxic, low-VOC formulation with strong adhesion. Sa2.5 prep required, 1.7–3.3mm application thickness.
2K epoxy MIO primer and intermediate coat with lamellar barrier structure for aggressive environments. Engineered for shipbuilding, bridges & port machinery. Single airless spray pass achieves 60–80µm DFT.
2K epoxy iron oxide primer with impact-resistant film and strong adhesion on steel and concrete. Compatible with polyurethane, alkyd & chlorinated rubber topcoat systems. Ambient cure at 25°C, 35–40µm DFT.
Industrial anti-corrosion and protective coating manufacturer. Direct supply from factory — no agents. ISO 9001 certified. Exporting to 30+ countries.
