- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
Single-component water-based acrylic topcoat with fast-drying, tough film and strong adhesion for automotive chassis, steel structures, guardrails and pipelines. Low-VOC, suited for indoor and outdoor applications. Sa2.5 prep, 50µm DFT per coat.
Overview
Waterborne acrylic anti-corrosion topcoat for interior and exterior steel components with low VOC.
Composition
Acrylic resin dispersion with pigments, additives, and functional fillers; water as thinner.
Typical uses
Anti-rust and decorative coating for automotive chassis, locomotives, steel structures, guardrails, pipelines, and similar indoor/outdoor facilities and equipment.
Technical data (typical)
Appearance: various colors.
Density: 1.3 kg/L.
Theoretical consumption: 0.14 kg/m² at 50 µm DFT (loss not included).
Drying time (25℃): surface dry 1 h; hard dry 24 h; full dry 7 d.
Application data (25°C)
Application methods: spray, brush, roller.
Thinner: clean water, 10–25%.
Recoat interval: min 24 h.
Surface preparation
When applied over primer: surfaces must be clean, dry, and free of contamination; roughen if maximum recoat interval is exceeded.
When used as first primer: blast steel to Sa 2.5 or power-tool clean to St 3 with 30–75 µm profile.
System compatibility / packing / storage
Construction conditions: ambient 5–35℃; RH ≤85%; not suitable in rain, snow, strong wind, heavy fog, or intense sun.
Storage: dry, cool, ventilated; 5–35℃; avoid strong sunlight; no outdoor storage.
Shelf life: 6 months.
We would love to speak with you.
Feel free to reach out using the below details.
2K epoxy glass flake coating with exceptional chemical resistance and abrasion resistance for severe corrosive environments. Engineered for offshore structures, chemical plants & wastewater facilities. Achieves up to 300µm DFT in heavy-duty applications.
2K C6-modified epoxy zinc primer engineered for synergistic cathodic protection and barrier performance. Suited for offshore platforms, marine vessels & petrochemical pipelines. Exceeds 1,200-hour salt spray resistance at 50µm DFT.
2K epoxy zinc-rich primer engineered for cathodic protection on structural steel. Suited for shipbuilding, bridges & oil tanks in aggressive environments. Sa2.5 prep required, 35–40µm DFT.
Industrial anti-corrosion and protective coating manufacturer. Direct supply from factory — no agents. ISO 9001 certified. Exporting to 30+ countries.
