ALL Products
Industrial Coatings Product Catalog | Anti‑Corrosion & Protective Coatings – HUILI
Product categories
Epoxy silicone heat-resistant coating (2K) for equipment and pipelines at 200–300°C.
-
Hot steel equipment, pipelines, components.
-
Pot life 4 h; thinner 5–9%.
-
Chemical resistance to acids, alkalis, salts.
Silicone high-temperature anti-corrosion coating (2K) for steel chimneys and hot steelwork.
-
Steel chimneys and steel structures.
-
Pot life 6 h; thinner 5–10%.
-
Primer supports cutting/welding; low-temperature application.
Cooling tower anti-corrosion waterproof coating (2K) for damp concrete and steel substrates.
-
Cooling towers, sewage tanks, chemical workshops.
-
Mix ratio 24:3; pot life 3 h.
-
3% HCl resistance 72 h; ≥65% solids.
Waterborne damp-proof anti-corrosion primer for cooling towers and concrete structures.
-
Cooling towers, tunnels, basements, buried pipelines.
-
Water thinning ≤7%; recoat 12 h–7 d.
-
3% acid/alkali/salt resistance: 48 h.
Cyanate waterproof and anti-corrosion coating (2K) for steel/concrete waterproofing and corrosion protection.
-
Steel and concrete; cooling tower linings.
-
Pot life 2 h; recoat 12 h–7 d.
-
Weathering, wear, water and oil resistance.
Cyanate waterproof coating for cooling tower linings and building damp-proofing.
-
Cooling towers, sewage tanks, basements.
-
Single-component; recoat 12 h–7 d.
-
Strong adhesion; anti-permeation; anti-mildew.
CSPE cooling tower damp-proof coating for inner wall anti-corrosion service.
-
For cooling tower inner wall protection.
-
Single-component; min recoat 12 h at 25°C.
-
Resists freeze-thaw, damp heat, and mildew.
Polyurethane cooling tower damp-proof coating (2K) for waterproof anti-corrosion lining.
-
For cooling towers, sewage tanks, mines, underground buildings.
-
Primer ratio 24:3; topcoat ratio 18:3.
-
Pot life 4 h; min recoat 12 h.
Premium polyurethane marking coating (2K) for steel structures and concrete chimneys.
-
For chimney marking and protection.
-
Mixing ratio 18:3; pot life 4 h.
-
High gloss; fully hardened 7 d at 25°C.
Epoxy bitumen cooling tower damp-proof coating (2K) for cooling tower inner wall protection.
-
For cooling towers, sewage tanks, underground mines.
-
Mixing ratio 25:2.5; pot life 4 h.
-
Waterproof, anti-seepage, and mildew resistant.
Chlorinated rubber acrylic marking coating for chimneys and steel tower marking.
-
For power plant concrete chimneys and steel towers.
-
Single-component; min recoat 12 h at 25°C.
-
Gloss ≥70; 25°C surface dry 1 h.
Premium acrylic marking coating for chimney and steel tower marking.
-
For power plant concrete chimneys and steel towers.
-
Single-component; min recoat 12 h at 25°C.
-
Thinner X-14; dilution 3–7%.
Long-lasting special marking coating for chimney and tower marking/protection.
-
For steel structures and concrete chimneys.
-
Single-component; min recoat 24 h at 25°C.
-
Gloss ≥80; dry to touch 1 h.
Perchloroethylene enamel for mechanical equipment and metal parts finishing.
-
For protective and decorative finishing on metals.
-
Single-component; min recoat 12 h at 25°C.
-
Thinner X-1; dilution 3–7%.
Perchloroethylene anti-corrosion coating for equipment, metal structures, and concrete.
-
For mechanical equipment, metal structures, concrete surfaces.
-
Single-component; min recoat 12 h at 25°C.
-
Primer/topcoat system available under PLG52.
Contact Us
We would love to speak with you.
Feel free to reach out using the below details.
Chinese