- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
2K polyurethane marking coating with high-gloss, UV resistance and freeze-thaw resistance for steel and concrete chimneys and transmission towers. Anti-chalking and anti-yellowing performance. 30µm DFT per coat, 4-coat system to 120µm.
Overview
Two-component premium polyurethane marking coating for marking and protection on steel structures and concrete chimneys.
High-gloss film with good resistance to water, weathering, freeze-thaw, heat, and low temperature.
Composition
Formulated with modified polyurethane resin, premium weather-resistant pigments, additives, and solvents.
Cured with trimer hardener; supplied in Part A & Part B packs.
Typical uses
Marking and protection for steel structures and concrete chimneys.
Technical data (typical)
Appearance: White; bright red.
Theoretical consumption: 0.16 kg/m² at 50 μm DFT (excluding loss).
Density: 1.2 kg/L.
Drying time (25°C): Surface dry 1 h; hard dry 24 h; fully hardened 7 d.
Gloss: High gloss.
Application data (25°C)
Mixing ratio (Part A:Part B): 18:3.
Induction time: 5 min.
Pot life: 4 h.
Application methods: Airless spray, brush, roller.
Thinner: X-10 polyurethane thinner; dilution 3–7%.
Recoat interval (25°C): Min 12 h; max 7 d.
Recommended coats / DFT: 1 coat 30–50 μm; brush/roller 1 coat 30–40 μm.
Surface preparation
Steel: blast/shot blast to Sa 2.5 or power-tool cleaning to St 3; surface profile 30–75 μm.
Concrete: must be dry (moisture content ≤6%) and clean; apply after a sealing primer; for old coatings, roughen and remove chalked/loose parts.
System compatibility / packing / storage
Compatibility: Previous coat—epoxy primer; epoxy intermediate coating; polyurethane primer.
Packing: Part A 18 kg; Part B 3 kg.
Storage: Shelf life 12 months; store dry/cool/ventilated, away from fire and direct sunlight; no outdoor stacking.
We would love to speak with you.
Feel free to reach out using the below details.
2K epoxy enamel with a porcelain-smooth, abrasion-resistant film for decorative heavy-duty corrosion protection on steel and concrete. Chemical, oil and moisture resistant. 30µm DFT per coat, 3-coat system to 100µm.
Single-component water-based intumescent coating delivering a 2-hour fire rating for indoor steel structures and building frames. Non-toxic, low-VOC formulation with strong adhesion. Sa2.5 prep required, 1.7–3.3mm application thickness.
2K epoxy sealer primer engineered for deep penetration and encapsulation of concrete and cement substrates. Seals and stabilizes surfaces to optimize adhesion for subsequent coating systems. Surface dry in 1 hour, full cure in 7 days.
Industrial anti-corrosion and protective coating manufacturer. Direct supply from factory — no agents. ISO 9001 certified. Exporting to 30+ countries.
