Industrial Coatings & Anti-Corrosion Systems | Product Catalog – HUILI
Epoxy ester anti-rust primer for steel structures (single-pack).
For guardrails and mining/mineshaft equipment steel surfaces.
Air-drying or low-temperature baking curing is specified.
Single-pack with no pot life limit (as stated); compatible with alkyd topcoats/enamels.
Epoxy rust-tolerant anti-rust primer (2K) for steel surfaces with slight rust.
Applicable on St1/St2 prepared steel; surface profile 15–35 µm (as stated).
Stabilizes rust by complexation with the substrate before hardening (as described).
Compatible with epoxy MIO intermediate and epoxy/PU topcoat systems.
Epoxy zinc phosphate anti-rust primer (2K) for heavy-duty steel corrosion protection.
For ports/docks, heavy structures, mining machinery, power machinery plants, and water conservancy steelwork.
Zinc phosphate anti-rust pigment system with stated water and salt water resistance.
Mix ratio 7:1; theoretical consumption 0.12 kg/m² at 50 µm DFT.
Epoxy Glass Flake Intermediate Coating (2K) – Two-component epoxy glass flake intermediate coating for heavy-duty barrier protection.
For marine/offshore, chemical areas, underground mines, and wastewater facilities; steel and concrete substrates.
Mix ratio 25:2.5; pot life 4 h (25°C).
Recoat 24 h–7 d (25°C); recommended DFT 60–80 µm per coat.
Modified Epoxy Iron Oxide Red Primer (2K) – Two-component modified epoxy iron oxide red anti-rust primer for steel and concrete.
For corrosion protection of steel structures and concrete surfaces.
Water and corrosion resistance with strong adhesion (as described).
Mix ratio 24:3; recoat 24 h–7 d (25°C).
Epoxy Sealer Primer (2K) – Two-component penetrating sealer primer for porous substrates.
For cement mortar, concrete, and fiber cement boards; also stated for wood.
Concrete moisture content < 6% before application (as stated).
Mix ratio 16:4; theoretical consumption 0.29 kg/m² at 50 µm DFT.
Epoxy bitumen glass flake coating (2K) for underground/underwater steel and concrete protection.
Underground tanks, mines, internal linings.
Pot life 4 h; recoat 24 h–7 d.
Water and chemical resistance; strong anti-permeation.
Moisture-curing epoxy bitumen coating (2K) for rapid hardening in humid conditions.
Mines, wastewater plants, ports, docks.
Mix ratio 24:3; pot life 4 h.
Resists water, seawater, oil, and chemicals.
Winter-grade epoxy coal tar bitumen coating (2K) that can be applied at -5°C.
Buried pipelines; steel and concrete protection.
Mix ratio 20:4; recoat 12 h–7 d.
Seawater, oil, chemical resistance; high insulation.
Epoxy coal tar bitumen anti-corrosion coating (2K) for buried pipelines and wet-dry service.
Buried pipelines, tank bottoms, submerged structures.
Mix ratio 7:1; recoat 12 h–7 d.
Resists seawater, salt spray, oil; anti-microbial.
Solvent-free epoxy coal tar bitumen coating (2K) for buried and pipeline heavy-duty protection.
Water/oil pipelines; buried installations.
Mix ratio 10:10; pot life 50 min.
96% solids; oil, water, solvent resistance.
Epoxy polyurethane heavy-duty anti-corrosion coating (2K) for steel, pipelines, tanks, and marine atmospheres.
Steel structures, pipelines, tanks, bridges, wharves.
Mix ratio 24:3; pot life 2 h.
60 d resistance in 5% acid/alkali/salt.
Chlorosulfonated polyethylene gas holder dedicated coating for gas holder outer wall protection.
For gas holders; also for other steel structures.
Single-component; min recoat 24 h at 25°C.
Resists water, H₂S, and chemical gas corrosion.
Chlorosulfonated polyethylene topcoat for chemical-atmosphere steel and concrete protection.
For corrosive environments on steel and concrete.
Single-pack; min recoat 24 h at 25°C.
Thinner X-1; dilution 3–7%.
Chlorinated rubber topcoat for ships, containers, bridges, and port machinery.
For ships, containers, mine equipment, gas holders.
Single-pack; min recoat 12 h at 25°C.
Thinner X-15; dilution 3–7%.
Chlorinated rubber aluminium paste high-build anti-rust coating for marine and underwater steel.
For ship bottom, waterline, deck, superstructure.
Single-pack; min recoat 12 h at 25°C.
Thinner X-15; dilution 3–7%.
