- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
2K solvent-free epoxy coal tar coating achieving 600µm+ DFT in a single coat with zero VOC. Engineered for buried pipelines, chemical equipment and underground structures. Outstanding oil and chemical resistance.
PLHL52-7 Solvent-Free Epoxy Coal Tar Bitumen Coating is a two-component solvent-free epoxy coal tar bitumen coating for heavy-duty anti-corrosion protection.
This coating is intended for water pipelines, oil pipelines, chemical equipment, and buried installations where heavy-duty protection is required.
It is composed of epoxy resin, special pigments, additives, and a modified curing agent, and is supplied as Part A and Part B.
Solvent-free formulation.
Designed for heavy-duty anti-corrosion protection.
Suitable for water pipelines and oil pipelines.
Suitable for chemical equipment.
Suitable for buried installations.
Volume solids: 96%.
This coating is suitable for a wide range of anti-corrosion projects in industrial and buried service environments.
Water pipelines
Oil pipelines
Chemical equipment
Buried installations
Blast to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
Storage
dry, cool, ventilated; away from fire; avoid strong sunlight; no outdoor storage.
System compatibility information is not provided in the current product data.
This product is a two-component solvent-free epoxy coal tar bitumen coating supplied as Part A and Part B.
This coating is used for heavy-duty protection on water pipelines, oil pipelines, chemical equipment, and buried installations.
This coating can be applied by airless spray or brush.
The volume solids content is 96%.
X-7 thinner should be used, and thinning should be minimized or not used.
The recommended dry film thickness per coat is 80–120 µm, or 40–50 µm by brush.
We would love to speak with you.
Feel free to reach out using the below details.
Single-component water-based intumescent coating delivering a 2-hour fire rating for indoor steel structures and building frames. Non-toxic, low-VOC formulation with strong adhesion. Sa2.5 prep required, 1.7–3.3mm application thickness.
2K special epoxy primer with outstanding adhesion and impact resistance for demanding industrial applications. Engineered for power plants, bridges & petrochemical facilities. Compatible with all topcoat systems, 60µm DFT per coat.
2K epoxy anti-corrosive primer that chemically reacts with surface corrosion to form a stable protective complex. Applies directly to corroded steel up to 60µm, minimizing surface preparation. Minimum 40µm DFT, universal topcoat compatibility.
Industrial anti-corrosion and protective coating manufacturer. Direct supply from factory — no agents. ISO 9001 certified. Exporting to 30+ countries.
