- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
2K epoxy coal tar coating engineered for low-temperature cure down to -10°C in severe corrosive environments. Suited for buried pipelines and steel structures. Sa2.5 prep, 50–60µm DFT per coat.
PLHL52-3 Winter-Grade Epoxy Coal Tar Bitumen Coating is a two-component winter-grade epoxy coal tar bitumen coating designed to cure under low-temperature conditions. This coating is used for corrosion protection of steel and concrete in severe corrosive environments and is suitable for the external anti-corrosion of buried pipelines.
It is composed of epoxy resin, coal tar pitch, anti-rust pigments, solvent, additives, catalyst, and a fast-drying curing agent, and is supplied as Part A and Part B.
Designed to cure under low-temperature conditions.
Suitable for corrosion protection of steel and concrete.
Suitable for severe corrosive environments.
Suitable for external anti-corrosion of buried pipelines.
Volume solids: ≥75%.
This coating is suitable for a wide range of steel and concrete protection projects in industrial environments.
Steel structures in severe corrosive environments
Concrete structures in severe corrosive environments
External anti-corrosion of buried pipelines
Blast to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
Storage
store in a dry, cool, ventilated place; keep away from fire; avoid strong sunlight; no outdoor storage.
System compatibility: winter-grade epoxy coal tar bitumen primer + winter-grade epoxy coal tar bitumen topcoat.
This product is a two-component winter-grade epoxy coal tar bitumen coating supplied as Part A and Part B.
This coating is used for steel and concrete.
This coating is used for corrosion protection in severe corrosive environments and for the external anti-corrosion of buried pipelines.
This coating can be applied by spray, brush, or roller.
HL52-6 dedicated thinner should be used, with 3–8% dilution.
The recommended dry film thickness per coat is 40–70 µm, or 30–40 µm by brush/roller.
We would love to speak with you.
Feel free to reach out using the below details.
2K ethyl silicate inorganic zinc-rich primer with high zinc content for maximum cathodic protection on industrial steel. Engineered for bridges, transmission towers & oil pipelines. Weld and cut tolerant, Sa2.5 prep, 40–80µm DFT.
Single-component epoxy ester primer engineered for anti-corrosive protection on ferrous metals. Suited for coastal and high-humidity industrial environments. Air-dry or low-temperature bake cure, 25–30µm DFT per coat.
2K C6-modified epoxy MIO intermediate coat engineered to extend coating service life on marine and offshore structures. Pairs with epoxy zinc primer for layered cathodic and barrier protection. 50µm DFT, Sa2.5 prep.
Industrial anti-corrosion and protective coating manufacturer. Direct supply from factory — no agents. ISO 9001 certified. Exporting to 30+ countries.
