- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
2K epoxy coal tar glass flake coating for buried and submerged steel structures and concrete. Outstanding water resistance and abrasion-resistant film for underground gas holders and mine shafts. 250µm+ total DFT.
PLHL52-1 Epoxy Bitumen Glass Flake Coating is a two-component epoxy bitumen glass flake coating for heavy-duty protection of steel and concrete in underground/underwater service and internal linings. This coating is intended for underground and underwater steel structures and concrete facilities, and for internal lining protection.
It is composed of epoxy resin, coal tar pitch, glass flakes, solvent, and additives, with a modified amine curing agent, and is supplied as Part A and Part B.
Designed for heavy-duty protection of steel and concrete.
Suitable for underground service.
Suitable for underwater service.
Suitable for internal lining protection.
Can be used on steel structures and concrete facilities.
This coating is suitable for a wide range of steel and concrete protection projects in industrial and underground or underwater environments.
Underground steel structures.
Underwater steel structures.
Concrete facilities in underground service.
Concrete facilities in underwater service.
Internal lining protection.
Gas holder and tank bottom plates.
Underground mines.
If applied over a two-component primer, surfaces must be clean, dry, and free of contaminants; abrade if beyond the maximum recoat interval. If used directly as the first coat, blast to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
Storage
store in a dry, cool, ventilated place; keep away from fire; avoid strong sunlight; no outdoor storage.
System compatibility includes epoxy zinc-rich primer, inorganic zinc-rich primer, and epoxy bitumen glass flake coating.
This product is a two-component epoxy bitumen glass flake coating supplied as Part A and Part B.
This coating is designed for steel and concrete.
This coating is used for underground and underwater steel structures, concrete facilities, and internal lining protection.
Yes. Examples of use include gas holder and tank bottom plates.
This coating can be applied by airless spray, brush, or roller.
The recoat interval is min 24 h and max 7 d.
We would love to speak with you.
Feel free to reach out using the below details.
2K epoxy enamel with a porcelain-smooth, abrasion-resistant film for decorative heavy-duty corrosion protection on steel and concrete. Chemical, oil and moisture resistant. 30µm DFT per coat, 3-coat system to 100µm.
Single-component water-based intumescent coating with 2-hour fire rating and outstanding weathering resistance for exterior steel structures. Resistant to UV, salt spray, freeze-thaw and acid-alkali exposure. Sa2.5 prep, 1.7–3.2mm application thickness.
Single-component epoxy ester primer engineered for anti-corrosive protection on ferrous metals. Suited for coastal and high-humidity industrial environments. Air-dry or low-temperature bake cure, 25–30µm DFT per coat.
