PLJ53-60 Chlorinated rubber aluminium paste high-build anti-rust coating

Overview
Single-pack chlorinated rubber aluminium paste high-build anti-rust coating with fast drying and thick film build per coat.​
Provides anti-rust performance, water resistance, corrosion resistance, and resistance to wet/dry alternation; applicable for low-temperature construction.​

Composition
Formulated with chlorinated rubber resin, plasticizer, aluminium paste, anti-rust pigments, solvents, and additives.​

Typical uses
For anti-rust protection of ship bottom, waterline, topside, decks, and superstructures.​
Also suitable for sluice gates, underwater steel structures, underground pipelines, gas holders, and other steel structures.​

Technical data (typical)

• Appearance: Silver white; aluminium red.​

• Theoretical consumption: 0.22 kg/m² at 60 μm DFT (excluding loss).​

• Density: 1.35 kg/L.​

• Drying time (25°C): Surface dry 1 h; hard dry 12 h.​

Application data (25°C)

• Mixing: Single-pack.​

• Induction time: None.​

• Pot life: Unlimited.​

• Application methods: Airless spray, brush, roller.​

• Thinner: X-15 chlorinated rubber thinner; dilution 3–7%.​

• Recoat interval (25°C): Min 12 h; max unlimited.​

• Recommended coats / DFT: 1 coat 35–50 μm; brush/roller 1 coat 30–40 μm.​

Surface preparation
Remove dust, oil, and debris from the previous coat; if beyond maximum recoat interval, consider roughening as needed.​
When used as the first coat: blast/shot blast to Sa 2.5 or power-tool cleaning to St 3; surface profile 30–75 μm.​

System compatibility / packing / storage

• Compatibility: Previous coat—epoxy zinc-rich primer; inorganic zinc-rich primer; epoxy intermediate coating; chlorinated rubber primer.​

• Compatibility: Topcoats—chlorinated rubber topcoat; acrylic topcoat.​

• Packing: 20 kg.​

• Storage: Shelf life 12 months; store in a dry, cool place.