• +86 150 5000 6973
  • +1 225 255 1197 (US
  • info@huilicoating.com
  • Yongqiao District, Anhui, China
ISO 9001:2015 Certified
GET A QUOTE

News

Technical Knowledge, Application Guidance & Engineering Experience

Industrial non slip coating on steel platform, stair tread and wet floor walkway

Industrial Non Slip Coating for Floors, Platforms and Steel Walkways

READ MORE
Water-based polyurethane topcoat spray application over epoxy coated steel panels

Polyurethane Water Based Top Coat: Spray Application and Over Epoxy Guide

READ MORE
Epoxy phenolic lining samples for chemical storage tank coating evaluation

Epoxy Phenolic Coating for Chemical Tank Lining: Selection Guide

READ MORE
Galvanized coating and zinc-rich coating comparison for steel protection

Galvanized Coating vs Zinc-Rich Coating for Steel Protection

READ MORE
Stainless steel protective coating evaluation for marine and chemical exposure

Stainless Steel Protective Coating: When Industrial Stainless Steel Needs Protection

READ MORE
Aluminum protective coating selection with epoxy primer and adhesion test samples

Aluminum Protective Coating: Primer, Surface Prep and System Selection Guide

READ MORE
Red oxide epoxy primer samples for industrial steel primer selection

Red Oxide Epoxy Primer: Color, Steel Protection, and Primer Selection Guide

READ MORE
Epoxy primer undercoat samples for industrial coating system compatibility

Epoxy Primer Undercoat: Layer Role and Compatibility in Industrial Coating Systems

READ MORE
Coating tanks supplier RFQ checklist for industrial tank projects

Coating Tanks Supplier: Buyer Checklist for Industrial Tank Coating Projects

READ MORE
Inspector checking surface profile on blast-cleaned structural steel before primer application in fabrication shop.

Steel Coatings Products: Product Matrix for Industrial Steel Projects

READ MORE
UV resistant polyurethane coating manufacturer inspection for outdoor steel

UV Resistant Polyurethane Coating Manufacturer: Buyer Selection Guide

READ MORE
Polyurethane top coat inspection on outdoor industrial steel

Polyurethane Top Coat for Outdoor Steel: UV, Weathering, and System Compatibility

READ MORE
Inspector checking surface profile on blast-cleaned structural steel before primer application in fabrication shop.

How to Write a Structural Steel Coating Specification: A Practical Guide

READ MORE
Coastal water treatment and desalination plant with potable water tanks, RO process buildings, brine pipelines, and corrosion-protected steel structures.

Coating for Water Treatment Plants and Desalination Facilities: Compliance, Corrosion, and Long Service Life

READ MORE

How Long Does Epoxy Coating Take to Cure — and What Affects It?

READ MORE
Inspector Checking Holiday Detection And DFT On Storage Tank During Internal Lining And External Coating Work

How to Inspect a Tank Lining Before Putting It Into Service

READ MORE
Applicator mechanically mixing two-component epoxy coating with drill paddle in industrial workshop with Part A and Part B containers and measuring vessel.

How to Mix Two-Component Epoxy Coating — and Why Getting It Wrong Matters

READ MORE
Workers applying zinc rich coating on structural steel in an industrial

How to Apply Epoxy Coating on Steel: A Step-by-Step Application Guide

READ MORE
Inspectors checking coated structural steel during industrial anti-corrosion paint work

How to Measure Dry Film Thickness on Coated Steel — A Practical Field Guide

READ MORE
Diagram of cathodic disbondment mechanism showing CP current, hydroxide generation, and coating adhesion failure around a pipeline coating holiday.

What Is Cathodic Disbondment — and Why Does It Matter for Pipeline and Immersion Coatings?

READ MORE
Industrial applicator mixing two-component epoxy coating in hot weather with Part A and Part B components and airless spray equipment in a steel fabrication yard.

What Is Pot Life in Epoxy Coating — and What Happens If You Ignore It?

READ MORE
Cross-section diagram showing zinc rich primer galvanic protection mechanism on structural steel with epoxy intermediate and polyurethane topcoat layers.

What Is a Zinc Rich Primer — and Why Is It Specified for Structural Steel?

READ MORE
Coating inspector using high-voltage spark tester for holiday detection on glass flake epoxy tank lining in industrial fabrication shop.

What Is Holiday Testing in Coatings — and When Is It Required?

READ MORE
Dry film thickness measurement for epoxy primer and polyurethane topcoat system

What Is DFT in Coating — and Why Does It Matter More Than Most People Think?

READ MORE
special industrial coatings for extreme industrial environments

Storage Tank and Pipeline Coating Systems: Corrosion Challenges and Solutions

READ MORE
Anti-corrosion coating system layers for industrial steel structures

Anti Corrosion Coating for Steel Structure: System Selection Guide for Industrial Projects

READ MORE
Coated steel structure at an industrial site in a hot coastal desert climate

Anti-Corrosion Coating Supplier for Middle East Projects: Standards, Climate & Proven Systems

READ MORE
Sweep blasting primed steel before applying intumescent coating]

Common Coating Failures in Steel Structure Projects and How to Avoid Them

READ MORE
Steel structure anti-corrosion coating system with primer epoxy intermediate and topcoat

Anti-Corrosion Coating for Steel Structures: System Selection Guide for Industrial Projects

READ MORE
special industrial coatings for functional industrial requirements

High Temperature Coatings for Middle East Projects: Heat, UV, Salt, and Sand

READ MORE
infrastructure concrete waterproof protective coating.jpg

Offshore Coating for Splash Zones: Glass Flake Epoxy vs Standard Epoxy

READ MORE
Chemical Tank Lining Application Inside A Steel Storage Tank With Ventilation And DFT Inspection At Weld Seams

Industrial Tank Lining for Chemical Tank Storage: Materials and Design Guide

READ MORE
Dry film thickness measurement for epoxy primer and polyurethane topcoat system

Zinc rich primer vs epoxy primer: differences, mechanism & when to use each

READ MORE
Zinc-rich primer application on blast-cleaned steel beams with DFT inspection in a fabrication yard

Zinc rich primer for steel structures: Types, standards & long‑term corrosion protection guide

READ MORE
Inspector verifying blast-cleaned steel surface prep in a refinery pipe rack before protective coating application.

NACE Coating Standards Explained: Surface Preparation, Corrosion Severity and System Selection

READ MORE
Industrial steel coating systems designed to meet international standards and specifications

ISO 12944 Corrosion Protection Explained: Corrosion Categories, Coating Systems and Design Life for Steel Structures

READ MORE
Decision flow for selecting an industrial coating supplier for a project

How to Choose the Right Industrial Coating Supplier for Your Project

READ MORE
Common ISO 12944 coating failures: chalking blistering edge rust

ISO 12944 Corrosion Categories Explained (C3, C4, C5)

READ MORE
UL 1709 hydrocarbon fire curve vs cellulosic fire curve comparison]

Fireproof Coating Standards: UL 1709 vs. BS 476 Explained

READ MORE
industrial coating manufacturer support for applications

The Coatings Industry in 2026: Market Challenges and Strategies for Coating Manufacturers

READ MORE
Industrial coating plant in China preparing export shipments around Chinese New Year with staff in the production area.

Chinese New Year and Our Commitment to Global Industrial Coating Projects

READ MORE
Industrial coatings manufacturing and quality control testing in a factory

Industrial Coating Manufacturer in China: Capabilities, Standards & Project Support

READ MORE

INQUIRY NOW

Contact Information