ALL Products
Industrial Coatings Product Catalog | Anti‑Corrosion & Protective Coatings – HUILI
Product categories
CSPE cooling tower damp-proof coating for inner wall anti-corrosion service.
-
For cooling tower inner wall protection.
-
Single-component; min recoat 12 h at 25°C.
-
Resists freeze-thaw, damp heat, and mildew.
Polyurethane cooling tower damp-proof coating (2K) for waterproof anti-corrosion lining.
-
For cooling towers, sewage tanks, mines, underground buildings.
-
Primer ratio 24:3; topcoat ratio 18:3.
-
Pot life 4 h; min recoat 12 h.
Premium polyurethane marking coating (2K) for steel structures and concrete chimneys.
-
For chimney marking and protection.
-
Mixing ratio 18:3; pot life 4 h.
-
High gloss; fully hardened 7 d at 25°C.
Epoxy bitumen cooling tower damp-proof coating (2K) for cooling tower inner wall protection.
-
For cooling towers, sewage tanks, underground mines.
-
Mixing ratio 25:2.5; pot life 4 h.
-
Waterproof, anti-seepage, and mildew resistant.
Chlorinated rubber acrylic marking coating for chimneys and steel tower marking.
-
For power plant concrete chimneys and steel towers.
-
Single-component; min recoat 12 h at 25°C.
-
Gloss ≥70; 25°C surface dry 1 h.
Premium acrylic marking coating for chimney and steel tower marking.
-
For power plant concrete chimneys and steel towers.
-
Single-component; min recoat 12 h at 25°C.
-
Thinner X-14; dilution 3–7%.
Long-lasting special marking coating for chimney and tower marking/protection.
-
For steel structures and concrete chimneys.
-
Single-component; min recoat 24 h at 25°C.
-
Gloss ≥80; dry to touch 1 h.
Perchloroethylene enamel for mechanical equipment and metal parts finishing.
-
For protective and decorative finishing on metals.
-
Single-component; min recoat 12 h at 25°C.
-
Thinner X-1; dilution 3–7%.
Perchloroethylene anti-corrosion coating for equipment, metal structures, and concrete.
-
For mechanical equipment, metal structures, concrete surfaces.
-
Single-component; min recoat 12 h at 25°C.
-
Primer/topcoat system available under PLG52.
Chlorosulfonated polyethylene gas holder dedicated coating for gas holder outer wall protection.
-
For gas holders; also for other steel structures.
-
Single-component; min recoat 24 h at 25°C.
-
Resists water, H₂S, and chemical gas corrosion.
Chlorosulfonated polyethylene topcoat for chemical-atmosphere steel and concrete protection.
-
For corrosive environments on steel and concrete.
-
Single-pack; min recoat 24 h at 25°C.
-
Thinner X-1; dilution 3–7%.
Chlorosulfonated polyethylene anti-rust coating for metal structures and concrete anti-corrosion.
-
For metal structures, equipment, concrete surfaces.
-
Single-pack; min recoat 10 h at 25°C.
-
Topcoat compatible with CSPE and H-CPE systems.
High-chlorinated polyethylene topcoat for steel and concrete anti-corrosion finishing.
-
For steel structures and concrete surfaces.
-
Single-pack; recoat 24 h to 7 d at 25°C.
-
Thinner X-16; dilution 3–7%.
High-chlorinated polyethylene enamel for chemical-industry steel and concrete finishing.
-
For chemical, petroleum, metallurgy, power industries.
-
Silver white: split-pack; mixing ratio 6:1.
-
Thinner X-16; dilution 3–7%.
High-chlorinated polyethylene intermediate coating for corrosion resistance and “three-proof” service.
-
Intermediate layer; can be used as first coat.
-
Single-pack; min recoat 12 h at 25°C.
-
Compatible with acrylic and chlorinated ether topcoats.
Contact Us
We would love to speak with you.
Feel free to reach out using the below details.