- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
Single-component high-chlorinated polyethylene enamel with outstanding UV resistance, color retention and chemical atmosphere resistance for steel and concrete. Suited for petrochemical, metallurgy and power industry structures. Fast-drying, 35µm DFT per coat.
Overview
Single-pack high-chlorinated polyethylene enamel with weathering resistance and color retention.
Full-bodied film with bright color; resistant to chemical-atmosphere corrosion; fast drying and low-temperature applicable.
Composition
Formulated with high-chlorinated polyethylene resin, chlorinated olefin resin, weather-resistant pigments, plasticizer, solvents, and additives.
Typical uses
For anti-corrosion finishing on steel structures and concrete surfaces in chemical, petroleum, metallurgy, and power industries.
Technical data (typical)
Appearance: Various colors.
Theoretical consumption: 0.16 kg/m² at 40 μm DFT (excluding loss).
Density: 1.2 kg/L.
Drying time (25°C): Surface dry 1 h; hard dry 24 h.
Application data (25°C)
Mixing: Single-pack (silver white is split-pack; mixing ratio 6:1).
Induction time: None.
Pot life: Unlimited.
Application methods: Airless spray, brush, roller.
Thinner: X-16 high-chlorinated polyethylene thinner; dilution 3–7%.
Recoat interval (25°C): Min 12 h; max unlimited.
Recommended coats / DFT: 1 coat 40–60 μm; brush/roller 1 coat 30–45 μm.
Surface preparation
Remove dust, oil, and debris from the previous coat; if beyond maximum recoat interval, consider roughening as needed.
When used as the first coat: blast/shot blast to Sa 2.5 or power-tool cleaning to St 3; surface profile 30–75 μm.
System compatibility / packing / storage
Compatibility: Previous coat—epoxy intermediate coating; high-chlorinated polyethylene anti-rust coating; high-chlorinated polyethylene intermediate coating.
Packing: 22 kg.
Storage: Shelf life 12 months; store dry/cool/ventilated, away from fire and direct sunlight; no outdoor stacking.
We would love to speak with you.
Feel free to reach out using the below details.
2K alkyl silicate inorganic zinc primer delivering cathodic protection with weld and cut tolerance on structural steel. Suited for low-temperature application with universal topcoat compatibility. Sa2.5 prep required, 30µm DFT.
2K special epoxy primer with outstanding adhesion and impact resistance for demanding industrial applications. Engineered for power plants, bridges & petrochemical facilities. Compatible with all topcoat systems, 60µm DFT per coat.
Single-component epoxy ester primer engineered for anti-corrosive protection on ferrous metals. Suited for coastal and high-humidity industrial environments. Air-dry or low-temperature bake cure, 25–30µm DFT per coat.
