PLSX-01 Waterborne Rust-Tolerant Anti-Rust Primer

Overview
Waterborne rust-tolerant anti-rust primer for steel structures where complete rust removal is difficult.​

Composition
Waterborne resin with active anti-rust pigments, special additives, functional fillers; water as thinner.​

Typical uses
Anti-corrosion of various steel structures, especially where thorough rust removal is not feasible; can be applied directly over lightly rusted steel or steel without loose mill scale, providing stabilization, conversion, and anti-rust functions.​

Technical data (typical)

• Appearance: iron red, grey.​

• Density: 1.3 kg/L.​

• Theoretical consumption: 0.13 kg/m² at 50 µm DFT (loss not included).​

• Drying time (25°C): surface dry 1 h; hard dry 24 h; full cure 7 d.​

Application data (25°C)

• Application methods: spray, brush, roller.​

• Thinner: clean water, 5–15%.​

• Recoat interval: ≥24 h.​

Surface preparation
Steel surface manually or mechanically cleaned to St1–St2; a small amount of rust allowed but no loose mill scale, loose rust, oil, dust, or other contaminants.​

System compatibility / packing / storage

• Construction conditions: ambient temperature 5–35°C; not suitable in rain, fog, snow, or when RH ≥85%.​

• Storage: dry, cool, ventilated; temperature 5–35°C; avoid strong sunlight, severe cold, and rain.​

• Shelf life: 6 months.