Polyurethane oil tank internal anti-static coating (2K) for oil storage and transfer internals.
Crude tanks, oil holds, pipeline internal walls.
Mix ratio 20:3; pot life 4 h.
No primer needed; 3 coats to 150 µm.
Overview
Two-component polyurethane anti-static coating for internal linings of oil tanks and oil pipelines.
Composition
Polyurethane resin, conductive pigments, additives, anti-static agent, solvent, curing agent; supplied as Part A & Part B.
Typical uses
Internal lining for crude oil storage tanks, petroleum product storage tanks, oil holds, and oil pipeline internal walls.
Technical data (typical)
Appearance: grey, black.
Theoretical consumption: 0.22 kg/m² at 90 µm DFT (loss not included).
Drying time (25°C): surface dry 2 h; hard dry 12 h; full cure 7 d.
Density: 1.3 kg/L.
Application data (25°C)
Mixing ratio (A:B): 20:3.
Induction time: 5 min.
Pot life: 4 h.
Application methods: airless spray, brush, roller.
Thinner: X-10 polyurethane dedicated thinner.
Recoat interval: min 12 h; max 7 d.
Recommended DFT per coat: 60–90 µm (brush/roller 30–40 µm).
System compatibility: PLS54-31 anti-static primer + topcoat.
Surface preparation
Steel: blast clean to Sa 2.5; surface profile 30–75 µm.
System compatibility / packing / storage
System compatibility: PLS54-31 polyurethane oil tank internal anti-static primer + topcoat.
Packing: Part A 20 kg; Part B 3 kg.
Storage: dry, cool, ventilated; away from fire; avoid strong sunlight; no outdoor storage.
Shelf life: 12 months.
We would love to speak with you.
Feel free to reach out using the below details.
High-Grade Epoxy Enamel (2K) – Epoxy enamel for decorative heavy-duty corrosion protection.
For steel structures and concrete surfaces.
Mix ratio 20:4; pot life 4 h.
Recoat 12 h–7 d; X-7 thinner 2–8%.
Outdoor Intumescent Fireproof Coating for Steel Structure – Waterborne intumescent coating for outdoor steel fire protection.
2 h rating: ≥3.2 mm; 4.5 kg/m² theoretical consumption.
Air spray 0.6–0.8 MPa; nozzle Φ4.0–6.0 mm.
Bond strength test result: 0.77 MPa.
Indoor Intumescent Fireproof Coating for Steel Structure – Waterborne intumescent coating for indoor steel fire protection.
2 h rating: ≥3.3 mm; 4.6 kg/m² theoretical consumption.
Water-thinnable; max dilution 5%.
Bond strength test result: 0.82 MPa.
Epoxy rust-tolerant anti-rust primer (2K) for steel surfaces with slight rust.
Applicable on St1/St2 prepared steel; surface profile 15–35 µm (as stated).
Stabilizes rust by complexation with the substrate before hardening (as described).
Compatible with epoxy MIO intermediate and epoxy/PU topcoat systems.
Protect. Perform. Endure. – Advanced Coatings for Industrial Excellence.
© 2025 All Rights reserved Anhui HUILI Coating Technology Co., Ltd. | Privacy Policy
Chinese