Coating Systems & Solutions
Surface Preparation for Industrial Coatings: ISO 8501, SSPC & Practical Selection Guide
Surface Preparation for I
Perchloroethylene enamel for mechanical equipment and metal parts finishing.
For protective and decorative finishing on metals.
Single-component; min recoat 12 h at 25°C.
Thinner X-1; dilution 3–7%.
Overview
Single-component perchloroethylene enamel with good gloss and flexibility.
Full-bodied film with corrosion resistance, weather resistance, water resistance, and oil resistance; suitable for low-temperature application.
Composition
Formulated with perchloroethylene resin, modified resin, quality pigments, extenders, plasticizer, and mixed solvents.
Typical uses
Protective and decorative finishing for various mechanical equipment and metal parts.
Technical data (typical)
Appearance: Various colors (gloss); also available in satin or matt.
Theoretical consumption: 0.16 kg/m² at 40 μm DFT (excluding loss).
Density: 1.2 kg/L.
Drying time (25°C): Surface dry 1 h; hard dry 24 h.
Application data (25°C)
Mixing: Single-component.
Induction time: None.
Pot life: Unlimited.
Application methods: Airless spray, brush, roller.
Thinner: X-1 thinner; dilution 3–7%.
Recoat interval (25°C): Min 12 h; max unlimited.
Recommended coats / DFT: 1 coat 40–60 μm; brush/roller 1 coat 30–40 μm.
Surface preparation
Steel: blast/shot blast to Sa 2.5, or power-tool cleaning to St 3.
Surface profile: 30–75 μm.
System compatibility / packing / storage
Compatibility: Previous coat—epoxy primer; epoxy intermediate coating; perchloroethylene anti-corrosion primer.
Packing: 20 kg.
Storage: Shelf life 12 months; store dry/cool/ventilated, away from fire and direct sunlight; no outdoor stacking.
CSPE cooling tower damp-proof coating for inner wall anti-corrosion service.
For cooling tower inner wall protection.
Single-component; min recoat 12 h at 25°C.
Resists freeze-thaw, damp heat, and mildew.
Polyurethane cooling tower damp-proof coating (2K) for waterproof anti-corrosion lining.
For cooling towers, sewage tanks, mines, underground buildings.
Primer ratio 24:3; topcoat ratio 18:3.
Pot life 4 h; min recoat 12 h.
Premium polyurethane marking coating (2K) for steel structures and concrete chimneys.
For chimney marking and protection.
Mixing ratio 18:3; pot life 4 h.
High gloss; fully hardened 7 d at 25°C.
Epoxy bitumen cooling tower damp-proof coating (2K) for cooling tower inner wall protection.
For cooling towers, sewage tanks, underground mines.
Mixing ratio 25:2.5; pot life 4 h.
Waterproof, anti-seepage, and mildew resistant.
Surface Preparation for I
Industrial Coating Failur
Anti Corrosion Coating Mi
We would love to speak with you.
Feel free to reach out using the below details.