Coating Systems & Solutions
Surface Preparation for Industrial Coatings: ISO 8501, SSPC & Practical Selection Guide
Surface Preparation for I
Perchloroethylene anti-corrosion coating for equipment, metal structures, and concrete.
For mechanical equipment, metal structures, concrete surfaces.
Single-component; min recoat 12 h at 25°C.
Primer/topcoat system available under PLG52.
Overview
Single-component perchloroethylene anti-corrosion coating system (primer/topcoat) with fast drying and relatively high hardness.
Provides weather resistance and corrosion resistance; suitable for low-temperature application.
Composition
Formulated with perchloroethylene resin, modified resin, pigments, extenders, plasticizer, and mixed solvents.
Typical uses
Anti-corrosion for mechanical equipment, metal structures, and concrete surfaces.
Technical data (typical)
Appearance: Primer—red iron oxide; topcoat—various colors.
Theoretical consumption: Primer 0.18 kg/m²; topcoat 0.2 kg/m²; both at 50 μm DFT (excluding loss).
Density: Primer 1.4 kg/L; topcoat 1.2 kg/L.
Drying time (25°C): Surface dry 1 h; hard dry 24 h.
Application data (25°C)
Mixing: Single-component.
Induction time: None.
Pot life: Unlimited.
Application methods: Airless spray, brush, roller.
Thinner: X-1 thinner; dilution 3–7%.
Recoat interval (25°C): Min 12 h; max unlimited.
Recommended coats / DFT: 1 coat 40–60 μm; brush/roller 1 coat 30–40 μm.
Surface preparation
Steel: blast/shot blast to Sa 2.5, or power-tool cleaning to St 3.
Surface profile: 30–75 μm.
System compatibility / packing / storage
Compatibility: PLG52 system—anti-corrosion primer + topcoat.
Packing: 20 kg.
Storage: Shelf life 12 months; store dry/cool/ventilated, away from fire and direct sunlight; no outdoor stacking.
CSPE cooling tower damp-proof coating for inner wall anti-corrosion service.
For cooling tower inner wall protection.
Single-component; min recoat 12 h at 25°C.
Resists freeze-thaw, damp heat, and mildew.
Polyurethane cooling tower damp-proof coating (2K) for waterproof anti-corrosion lining.
For cooling towers, sewage tanks, mines, underground buildings.
Primer ratio 24:3; topcoat ratio 18:3.
Pot life 4 h; min recoat 12 h.
Premium polyurethane marking coating (2K) for steel structures and concrete chimneys.
For chimney marking and protection.
Mixing ratio 18:3; pot life 4 h.
High gloss; fully hardened 7 d at 25°C.
Epoxy bitumen cooling tower damp-proof coating (2K) for cooling tower inner wall protection.
For cooling towers, sewage tanks, underground mines.
Mixing ratio 25:2.5; pot life 4 h.
Waterproof, anti-seepage, and mildew resistant.
Surface Preparation for I
Industrial Coating Failur
Anti Corrosion Coating Mi
We would love to speak with you.
Feel free to reach out using the below details.