PLJ53-61 Chlorinated rubber red iron oxide anti-rust coating

Overview
Single-pack chlorinated rubber red iron oxide anti-rust coating with anti-rust performance, adhesion, and shielding properties.​
Provides water resistance and salt spray corrosion resistance.​

Composition
Formulated with chlorinated rubber resin, red iron oxide, micaceous iron oxide (MIO) powder, anti-rust pigments, solvents, plasticizer, and additives.​

Typical uses
Anti-rust and anti-corrosion for steel structures.​
Can be used as a strengthening layer for J53-60 chlorinated rubber aluminium paste anti-rust coating.​

Technical data (typical)

• Appearance: J53-61 red iron oxide color.​

• Theoretical consumption: 0.2 kg/m² at 60 μm DFT (excluding loss).​

• Density: 1.37 kg/L.​

• Drying time (25°C): Surface dry 1 h; hard dry 12 h.​

Application data (25°C)

• Mixing: Single-pack.​

• Induction time: None.​

• Pot life: Unlimited.​

• Application methods: Airless spray, brush, roller.​

• Thinner: X-15 chlorinated rubber thinner; dilution 3–7%.​

• Recoat interval (25°C): Min 12 h; max unlimited.​

• Recommended coats / DFT: 1 coat 30–60 μm; brush/roller 1 coat 30–40 μm.​

Surface preparation
Remove dust and oil contamination from the previous coat; if beyond maximum recoat interval, consider roughening as needed.​
When used as the first coat: blast/shot blast to Sa 2.5 or power-tool cleaning to St 3; surface profile 30–75 μm.​

System compatibility / packing / storage

• Compatibility: Previous coat—epoxy (zinc-rich) primer; inorganic zinc-rich primer.​

• Compatibility: Topcoats—53-60 chlorinated rubber aluminium paste anti-rust coating; chlorinated rubber topcoat; acrylic topcoat.​

• Packing: 25 kg.​

• Storage: Shelf life 12 months; store dry/cool/ventilated, away from fire and strong sunlight; no outdoor stacking.