ISO 9001:2015 Certified

PLX53-1 High-chlorinated polyethylene anti-rust coating

Single-component high-chlorinated polyethylene primer with strong adhesion and corrosion protection for steel and concrete in chemical and industrial atmospheres. Fast-drying with low-temperature cure capability. Sa2.5 prep, 40µm DFT per coat.

Facebook
Twitter
LinkedIn

PLX53-1 High-chlorinated polyethylene anti-rust coating Description

Overview
Single-pack high-chlorinated polyethylene anti-rust coating with strong adhesion and fast drying.​
Tough film, good anti-rust performance, suitable for low-temperature application.​

Composition
Formulated with high-chlorinated polyethylene resin, stable resin, anti-rust pigments, plasticizer, solvents, and additives.​

Typical uses
Anti-corrosion for steel structures and concrete surfaces under chemical-atmosphere and industrial-atmosphere corrosive environments.​

Technical data (typical)

  • Appearance: Red iron oxide; red-brown.​

  • Theoretical consumption: 0.14 kg/m² at 40 μm DFT (excluding loss).​

  • Density: 1.4 kg/L.​

  • Drying time (25°C): Surface dry 1 h; hard dry 24 h.​

Application data (25°C)

  • Mixing: Single-pack.​

  • Induction time: None.​

  • Pot life: Unlimited.​

  • Application methods: Airless spray, brush, roller.​

  • Thinner: X-16 high-chlorinated polyethylene thinner; dilution 3–7%.​

  • Recoat interval (25°C): Min 12 h; max unlimited.​

  • Recommended coats / DFT: 1 coat 40–60 μm; brush/roller 1 coat 30–45 μm.​

Surface preparation
Remove dust, oil, and debris from the previous coat; if beyond maximum recoat interval, consider roughening as needed.​
When used as the first coat: blast/shot blast to Sa 2.5 or power-tool cleaning to St 3; surface profile 30–75 μm.​

System compatibility / packing / storage

  • Compatibility: Previous coat—epoxy anti-rust coating; epoxy MIO intermediate coating; high-chlorinated polyethylene primer.​

  • Compatibility: Topcoats—high-chlorinated polyethylene intermediate coating; high-chlorinated polyethylene topcoat; acrylic topcoat.​

  • Packing: 25 kg.​

  • Storage: Shelf life 12 months; store dry/cool/ventilated, away from fire and direct sunlight; no outdoor stacking.

Contact Us

We would love to speak with you.
Feel free to reach out using the below details.

HUILI anti-corrosion coatings metal paint pail

PLE06-4 Inorganic Zinc-Rich Primer

2K ethyl silicate inorganic zinc-rich primer with high zinc content for maximum cathodic protection on industrial steel. Engineered for bridges, transmission towers & oil pipelines. Weld and cut tolerant, Sa2.5 prep, 40–80µm DFT.

HUILI anti-corrosion coatings metal paint pail

PLH53-5 Epoxy Rust-Tolerant Anti-Rust Primer

2K epoxy anti-corrosive primer that chemically reacts with surface corrosion to form a stable protective complex. Applies directly to corroded steel up to 60µm, minimizing surface preparation. Minimum 40µm DFT, universal topcoat compatibility.

HUILI anti-corrosion coatings metal paint pail

PLH53-2 Epoxy Iron Oxide Red Anti-Rust Primer

2K epoxy iron oxide primer with impact-resistant film and strong adhesion on steel and concrete. Compatible with polyurethane, alkyd & chlorinated rubber topcoat systems. Ambient cure at 25°C, 35–40µm DFT.

INQUIRY NOW

Contact Information