Polyurethane MIO intermediate coating (2K) for sealing and reinforcement in PU systems.
Intermediate layer for polyurethane coating systems.
Mixing ratio 9:1; thinner X-10 at 3–7%.
Compatible with polyurethane and acrylic polyurethane topcoats.
Overview
Two-component micaceous iron oxide anti-rust coating / intermediate coating with shielding effect and anti-corrosion performance.
Designed for good intercoat adhesion with primers and topcoats; fast drying and low-temperature applicability.
Composition
Based on polyurethane resin, micaceous iron oxide (MIO) powder, quality pigments, solvents, and additives.
Cured with polyisocyanate; supplied in Part A & Part B packs.
Typical uses
Intermediate coating for polyurethane coating systems to improve sealing and build.
Can also be used as the first coat primer.
Technical data (typical)
Appearance: Grey; brown.
Theoretical consumption: 0.14 kg/m² at 50 μm DFT (excluding loss).
Density: 1.45 kg/L.
Drying time (25°C): Surface dry 2 h; hard dry 24 h; fully cured 7 d.
Application data (25°C)
Mixing ratio (Part A:Part B): 9:1.
Induction time: 5 min.
Pot life: 3 h.
Application methods: Airless spray, brush, roller.
Thinner: X-10 polyurethane thinner; dilution 3–7%.
Recoat interval (25°C): Min 24 h; max 7 d.
Recommended coats / DFT: 1 coat 40–70 μm; brush/roller 1 coat 30–40 μm.
Surface preparation
Remove dust, oil, and debris from the previous coat; if beyond maximum recoat interval, roughen the surface.
When used as the first coat: blast/shot blast to Sa 2.5 or power-tool cleaning to St 3; surface profile 30–75 μm.
System compatibility / packing / storage
Compatibility: Polyurethane topcoat; acrylic polyurethane topcoat.
Packing: Part A 27 kg; Part B 3 kg.
Storage: Shelf life 12 months; store dry/cool/ventilated, away from fire and direct sunlight; no outdoor stacking.
We would love to speak with you.
Feel free to reach out using the below details.
High-Grade Epoxy Enamel (2K) – Epoxy enamel for decorative heavy-duty corrosion protection.
For steel structures and concrete surfaces.
Mix ratio 20:4; pot life 4 h.
Recoat 12 h–7 d; X-7 thinner 2–8%.
Inorganic Zinc-Rich Primer (2K) – Two-component ethyl silicate zinc-rich primer for cathodic protection of blast-cleaned steel.
General-purpose use for bridges, towers, gas holders, oil tanks, oil/gas pipelines, and industrial steel structures.
High zinc dust content with stated water/oil/media resistance and welding/cutting resistance.
Sa 3 surface preparation (not lower than Sa 2.5); touch dry 10 min at 25°C, RH 70–85%.
Epoxy rust-tolerant anti-rust primer (2K) for steel surfaces with slight rust.
Applicable on St1/St2 prepared steel; surface profile 15–35 µm (as stated).
Stabilizes rust by complexation with the substrate before hardening (as described).
Compatible with epoxy MIO intermediate and epoxy/PU topcoat systems.
Epoxy Zinc Primer (2K, C6-Modified) – Two-component epoxy zinc primer (C6-modified) for cathodic-protection priming.
Salt spray resistance 1300 h (as stated).
Theoretical consumption 0.25 kg/m² at 50 µm DFT (losses not included).
For offshore platforms, underwater steel, pipelines, oil tanks, bridges, and petrochemical steel structures.
Protect. Perform. Endure. – Advanced Coatings for Industrial Excellence.
© 2025 All Rights reserved Anhui HUILI Coating Technology Co., Ltd. | Privacy Policy
