Overview
Two-component heavy-duty anti-corrosion coating based on epoxy and polyurethane chemistry.​

Composition
Polyurethane prepolymer, epoxy resin, special additives, pigments, solvent, and auxiliaries.​

Typical uses
Steel structures, gas pipelines, chemical facilities and pipelines, oil tanks and vessels, bridges and wharves, gas holders, motors/electrical equipment, aluminium alloy, and cement substrates for corrosion protection.​

Technical data (typical)

• Appearance: various colors.​

• Theoretical consumption: 0.16 kg/m² at 50 µm DFT (loss not included).​

• Density: 1.35.​

• Drying time (25°C): surface dry 1 h; hard dry 24 h; full cure 7 d.​

• Medium resistance: 60 d no blistering, no peeling, no rusting (5% acid/alkali/salt).​

Application data (25°C)

• Mixing ratio (A:B): 24:3.​

• Induction time: 5 min.​

• Pot life: 2 h.​

• Application methods: airless spray, brush, roller.​

• Thinner: dedicated thinner, 2–8%.​

• Recoat interval: min 12 h; max 7 d.​

• Recommended DFT per coat: 50–80 µm (brush/roller 40–60 µm).​

Surface preparation
Blast to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.​

System compatibility / packing / storage

• System compatibility: PLHS-1 epoxy polyurethane heavy-duty primer + topcoat.​

• Packing: Part A 24 kg; Part B 3 kg.​

• Storage: dry, cool, ventilated; away from fire; avoid strong sunlight; no outdoor storage.​

• Shelf life: 12 months.