- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
2K modified epoxy topcoat with fast-drying performance and weathering resistance for marine and industrial use. Suited for offshore platforms, port equipment and gas holders. Surface dry under 2 hours, 80–100µm DFT.
PLH-60 Modified Epoxy Weather-Resistant Topcoat is a two-component modified epoxy weather-resistant topcoat with color and gloss retention. This topcoat is used on port equipment, sluice gates, gas holders, pipelines, drilling platforms, and ships in corrosive environments.
It is composed of modified epoxy resin, imported weather-resistant pigments, imported additives, mixed solvent, and an imported modified curing agent.
Weather-resistant topcoat.
Provides color retention.
Provides gloss retention.
Suitable for corrosive environments.
Suitable for port equipment, pipelines, drilling platforms, and ships.
This topcoat is suitable for a wide range of steel protection projects in industrial and marine environments.
Port equipment
Sluice gates
Gas holders
Pipelines
Drilling platforms
Ships in corrosive environments
Blast to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
Storage
dry, cool, ventilated; away from fire; avoid strong sunlight; no outdoor storage.
System compatibility: epoxy primer; epoxy intermediate coating.
This product is a two-component modified epoxy weather-resistant topcoat.
This topcoat is used on port equipment, sluice gates, gas holders, pipelines, drilling platforms, and ships in corrosive environments.
This topcoat is described with color and gloss retention.
This topcoat can be applied by airless spray, brush, or roller.
The recommended dry film thickness per coat is 40–60 µm, or 30–40 µm by brush/roller.
System compatibility includes epoxy primer and epoxy intermediate coating.
We would love to speak with you.
Feel free to reach out using the below details.
2K epoxy sealer primer engineered for deep penetration and encapsulation of concrete and cement substrates. Seals and stabilizes surfaces to optimize adhesion for subsequent coating systems. Surface dry in 1 hour, full cure in 7 days.
2K epoxy zinc-rich primer engineered for cathodic protection on structural steel. Suited for shipbuilding, bridges & oil tanks in aggressive environments. Sa2.5 prep required, 35–40µm DFT.
Industrial anti-corrosion and protective coating manufacturer. Direct supply from factory — no agents. ISO 9001 certified. Exporting to 30+ countries.
