- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
2K epoxy coal tar coating engineered for low-temperature cure down to -10°C in severe corrosive environments. Suited for buried pipelines and steel structures. Sa2.5 prep, 50–60µm DFT per coat.
PLHL52-3 Winter-Grade Epoxy Coal Tar Bitumen Coating is a two-component winter-grade epoxy coal tar bitumen coating designed to cure under low-temperature conditions. This coating is used for corrosion protection of steel and concrete in severe corrosive environments and is suitable for the external anti-corrosion of buried pipelines.
It is composed of epoxy resin, coal tar pitch, anti-rust pigments, solvent, additives, catalyst, and a fast-drying curing agent, and is supplied as Part A and Part B.
Designed to cure under low-temperature conditions.
Suitable for corrosion protection of steel and concrete.
Suitable for severe corrosive environments.
Suitable for external anti-corrosion of buried pipelines.
Volume solids: ≥75%.
This coating is suitable for a wide range of steel and concrete protection projects in industrial environments.
Steel structures in severe corrosive environments
Concrete structures in severe corrosive environments
External anti-corrosion of buried pipelines
Blast to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
Storage
store in a dry, cool, ventilated place; keep away from fire; avoid strong sunlight; no outdoor storage.
System compatibility: winter-grade epoxy coal tar bitumen primer + winter-grade epoxy coal tar bitumen topcoat.
This product is a two-component winter-grade epoxy coal tar bitumen coating supplied as Part A and Part B.
This coating is used for steel and concrete.
This coating is used for corrosion protection in severe corrosive environments and for the external anti-corrosion of buried pipelines.
This coating can be applied by spray, brush, or roller.
HL52-6 dedicated thinner should be used, with 3–8% dilution.
The recommended dry film thickness per coat is 40–70 µm, or 30–40 µm by brush/roller.
We would love to speak with you.
Feel free to reach out using the below details.
Single-component water-based intumescent coating delivering a 2-hour fire rating for indoor steel structures and building frames. Non-toxic, low-VOC formulation with strong adhesion. Sa2.5 prep required, 1.7–3.3mm application thickness.
2K ethyl silicate inorganic zinc-rich primer with high zinc content for maximum cathodic protection on industrial steel. Engineered for bridges, transmission towers & oil pipelines. Weld and cut tolerant, Sa2.5 prep, 40–80µm DFT.
2K epoxy iron oxide primer with impact-resistant film and strong adhesion on steel and concrete. Compatible with polyurethane, alkyd & chlorinated rubber topcoat systems. Ambient cure at 25°C, 35–40µm DFT.
