Epoxy rust-tolerant anti-rust primer (2K) for steel surfaces with slight rust.
Applicable on St1/St2 prepared steel; surface profile 15–35 µm (as stated).
Stabilizes rust by complexation with the substrate before hardening (as described).
Compatible with epoxy MIO intermediate and epoxy/PU topcoat systems.
PLH53-5 Epoxy Rust-Tolerant Anti-Rust Primer is a two-component, polyamide-cured epoxy rust-tolerant anti-rust primer designed for application on slightly rusted steel surfaces and incompletely cleaned metal surfaces.
The product is formulated with epoxy resin, active anti-rust pigments, organic nitrogen base, penetrant, stabilizer, additives, and solvent, and is supplied with a polyamide curing agent as Part A and Part B. The coating film is described as forming stable complexation with the substrate before hardening to stabilize rust and provide durable rust protection.
Designed for application on slightly rusted steel surfaces
Suitable for incompletely cleaned metal surfaces
Minimum surface preparation is stated as St1/St2
Described as stabilizing rust before hardening
Can be applied by airless spray, brush, or roller
Compatible with a wide range of intermediate coatings and topcoats
This primer is suitable for steel protection projects where rust-tolerant application and simplified surface preparation are required.
Typical application areas
Slightly rusted steel surfaces
Incompletely cleaned metal surfaces
Steel substrates requiring anti-rust priming
Maintenance and repair uses
Direct application on slightly rusted steel
Direct application on incompletely derusted metal surfaces
Remove oil, loose dust, water stains, and loose rust; minimum surface preparation St1/St2; surface profile 15–35 µm. If derusting is more thorough, performance is stated to be more prominent.
Storage
Store in a dry, cool, ventilated warehouse away from fire sources and direct sunlight; outdoor storage is not permitted.
This primer is compatible with epoxy MIO intermediate coating, epoxy topcoat, polyurethane topcoat, acrylic topcoat, chlorinated rubber topcoat, high chlorinated polyethylene topcoat, chlorosulfonated polyethylene topcoat, and chlorinated ether topcoat.
What is this primer used for?
This primer is used for application on slightly rusted steel surfaces and incompletely cleaned metal surfaces.
What minimum surface preparation is stated for this product?
Minimum surface preparation is stated as St1/St2.
What application methods are recommended?
The product can be applied by airless spray, brush, or roller.
What surface preparation is required before application?
Remove oil, loose dust, water stains, and loose rust; minimum surface preparation St1/St2; surface profile 15–35 µm.
What is the recommended recoat interval?
The minimum recoat interval is 12 h at 25°C, and the maximum recoat interval is 7 days.
What coatings is it compatible with?
It is compatible with epoxy MIO intermediate coating, epoxy topcoat, polyurethane topcoat, acrylic topcoat, chlorinated rubber topcoat, high chlorinated polyethylene topcoat, chlorosulfonated polyethylene topcoat, and chlorinated ether topcoat.
We would love to speak with you.
Feel free to reach out using the below details.
Epoxy High-Build Topcoat (2K) – High-solids epoxy topcoat for heavy-duty protection.
For steel structures and concrete surfaces.
Induction time 5 h; pot life 3 h.
Recoat 24 h–7 d; X-7 thinner 3–9%.
Outdoor Intumescent Fireproof Coating for Steel Structure – Waterborne intumescent coating for outdoor steel fire protection.
2 h rating: ≥3.2 mm; 4.5 kg/m² theoretical consumption.
Air spray 0.6–0.8 MPa; nozzle Φ4.0–6.0 mm.
Bond strength test result: 0.77 MPa.
Inorganic Zinc Silicate Primer (2K) – Two-component inorganic zinc silicate primer for long-term steel corrosion protection with cathodic protection.
For blast-cleaned steel; surface preparation Sa 3 (not lower than Sa 2.5) is specified.
Fast drying at 25°C, RH 70–85%: touch dry 10 min; hard dry 2 h; cured 24 h.
Mix ratio 28:7; thinner X-11 inorganic zinc thinner (5–20%); compatible with epoxy/PU coating systems.
Epoxy MIO intermediate coating (2K) for barrier protection in cathodic-protection coating systems.
Used with PLH53-35 epoxy zinc primer as a supporting intermediate coat.
Salt water resistance: 20 days (as stated).
Mixing ratio 8:1 (by weight); recommended DFT 60–90 µm per coat.
Protect. Perform. Endure. – Advanced Coatings for Industrial Excellence.
© 2025 All Rights reserved Anhui HUILI Coating Technology Co., Ltd. | Privacy Policy
