Super weather-resistant fluorocarbon coating (2K) for durable exterior protection of steelwork.
Bridges, gates, towers, chemical equipment.
Mix ratio 8:1; pot life 4 h.
Weathering and color retention: 20+ years.
Overview
Two-component fluorocarbon coating for anti-corrosion protection and surface finishing of metal structures.
Composition
Fluorocarbon resin, premium pigments, solvent, imported additives; biuret used as curing agent; supplied as Part A & Part B.
Typical uses
Anti-corrosion protection for metal components, large gates, transmission towers, TV towers, large bridges, and chemical equipment.
Also suitable for surface protection/decoration of high-grade buildings.
Technical data (typical)
Appearance: various colors.
Theoretical consumption: 0.16 kg/m² at 50 µm DFT (loss not included).
Density: 1.20 kg/L.
Drying time (25°C): surface dry 1 h; hard dry 24 h; full cure 7 d.
Application data (25°C)
Mixing ratio (A:B): 8:1.
Induction time: 5 min.
Pot life: 4 h.
Application methods: airless spray, brush, roller.
Thinner: dedicated thinner, 3–8%.
Recoat interval: min 12 h; max 7 d.
Recommended DFT per coat: 30–50 µm (brush/roller 30–40 µm).
Compatible undercoats: epoxy zinc-rich primer, inorganic zinc-rich primer, epoxy MIO intermediate coating, etc.
Surface preparation
Steel: blast to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
System compatibility / packing / storage
Packing: Part A 20 kg; Part B 2.5 kg.
Storage: dry, cool, ventilated; away from fire; avoid strong sunlight; no outdoor storage.
Shelf life: 8 months.
We would love to speak with you.
Feel free to reach out using the below details.
Inorganic Zinc-Rich Primer (2K) – Two-component ethyl silicate zinc-rich primer for cathodic protection of blast-cleaned steel.
General-purpose use for bridges, towers, gas holders, oil tanks, oil/gas pipelines, and industrial steel structures.
High zinc dust content with stated water/oil/media resistance and welding/cutting resistance.
Sa 3 surface preparation (not lower than Sa 2.5); touch dry 10 min at 25°C, RH 70–85%.
Epoxy Glass Flake Intermediate Coating (2K) – Two-component epoxy glass flake intermediate coating for heavy-duty barrier protection.
For marine/offshore, chemical areas, underground mines, and wastewater facilities; steel and concrete substrates.
Mix ratio 25:2.5; pot life 4 h (25°C).
Recoat 24 h–7 d (25°C); recommended DFT 60–80 µm per coat.
Epoxy zinc phosphate anti-rust primer (2K) for heavy-duty steel corrosion protection.
For ports/docks, heavy structures, mining machinery, power machinery plants, and water conservancy steelwork.
Zinc phosphate anti-rust pigment system with stated water and salt water resistance.
Mix ratio 7:1; theoretical consumption 0.12 kg/m² at 50 µm DFT.
Epoxy rust-tolerant anti-rust primer (2K) for steel surfaces with slight rust.
Applicable on St1/St2 prepared steel; surface profile 15–35 µm (as stated).
Stabilizes rust by complexation with the substrate before hardening (as described).
Compatible with epoxy MIO intermediate and epoxy/PU topcoat systems.
Protect. Perform. Endure. – Advanced Coatings for Industrial Excellence.
© 2025 All Rights reserved Anhui HUILI Coating Technology Co., Ltd. | Privacy Policy
Chinese