Epoxy polyurethane heavy-duty anti-corrosion coating (2K) for steel, pipelines, tanks, and marine atmospheres.
Steel structures, pipelines, tanks, bridges, wharves.
Mix ratio 24:3; pot life 2 h.
60 d resistance in 5% acid/alkali/salt.
PLHS-1 Epoxy Polyurethane Heavy-Duty Anti-Corrosion Coating is a two-component heavy-duty anti-corrosion coating based on epoxy and polyurethane chemistry for steel structures, pipelines, tanks, bridges, and wharves.
This coating is used for corrosion protection on steel structures, gas pipelines, chemical facilities and pipelines, oil tanks and vessels, bridges and wharves, gas holders, motors and electrical equipment, aluminium alloy, and cement substrates.
It is composed of polyurethane prepolymer, epoxy resin, special additives, pigments, solvent, and auxiliaries.
Based on epoxy and polyurethane chemistry.
Suitable for steel structures, pipelines, tanks, bridges, and wharves.
Suitable for gas holders, motors and electrical equipment.
Suitable for aluminium alloy and cement substrates.
Medium resistance: 60 d no blistering, no peeling, no rusting (5% acid/alkali/salt).
This coating is suitable for a wide range of steel protection projects in industrial and marine environments.
Steel structures
Gas pipelines
Chemical facilities
Chemical pipelines
Oil tanks
Vessels
Bridges
Wharves
Gas holders
Motors and electrical equipment
Aluminium alloy substrates
Cement substrates
Blast to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
Storage
dry, cool, ventilated; away from fire; avoid strong sunlight; no outdoor storage.
System compatibility: epoxy polyurethane heavy-duty primer + topcoat.
This product is a two-component heavy-duty anti-corrosion coating based on epoxy and polyurethane chemistry.
This coating can be used on steel, aluminium alloy, and cement substrates.
This coating is used for steel structures, gas pipelines, chemical facilities and pipelines, oil tanks and vessels, bridges and wharves, gas holders, and motors and electrical equipment.
This coating can be applied by airless spray, brush, or roller.
The recommended dry film thickness per coat is 50–80 µm, or 40–60 µm by brush or roller.
The stated medium resistance is 60 d no blistering, no peeling, no rusting (5% acid/alkali/salt).
We would love to speak with you.
Feel free to reach out using the below details.
High-Grade Epoxy Enamel (2K) – Epoxy enamel for decorative heavy-duty corrosion protection.
For steel structures and concrete surfaces.
Mix ratio 20:4; pot life 4 h.
Recoat 12 h–7 d; X-7 thinner 2–8%.
Modified Epoxy Iron Oxide Red Primer (2K) – Two-component modified epoxy iron oxide red anti-rust primer for steel and concrete.
For corrosion protection of steel structures and concrete surfaces.
Water and corrosion resistance with strong adhesion (as described).
Mix ratio 24:3; recoat 24 h–7 d (25°C).
Epoxy Glass Flake Intermediate Coating (2K) – Two-component epoxy glass flake intermediate coating for heavy-duty barrier protection.
For marine/offshore, chemical areas, underground mines, and wastewater facilities; steel and concrete substrates.
Mix ratio 25:2.5; pot life 4 h (25°C).
Recoat 24 h–7 d (25°C); recommended DFT 60–80 µm per coat.
Epoxy Red Lead Anti-Rust Primer (2K) – Two-component epoxy anti-rust primer for steel corrosion protection.
Protect. Perform. Endure. – Advanced Coatings for Industrial Excellence.
© 2025 All Rights reserved Anhui HUILI Coating Technology Co., Ltd. | Privacy Policy
