Polyurea anti-corrosion material for rapid-build seamless protective lining applications.
Chemical anti-corrosion and waterproof protection projects.
100% solids; no organic volatile matter.
Resistant to brine, acids, alkalis, oils.
Overview
Fast-curing polyurea anti-corrosion material for protective coating applications requiring rapid build and seamless film.
Composition
Typical uses
Used in chemical anti-corrosion engineering, waterproof protection engineering, wear-resistant engineering, sports engineering, military engineering, marine engineering, and power engineering.
Technical data (typical)
| Corrosion resistance medium | Result |
|---|---|
| Saturated brine | Good |
| Ammonium nitrate | Good |
| Sodium chloride | Good |
| Sodium phosphate | Good |
| Sodium perchlorate | Good |
| Acetic acid (100%) | Good |
| Hydrochloric acid (5%, 10%) | Good |
| Nitric acid (20%) | Discoloration and embrittlement |
| Sulfuric acid (5%, 10%, 20%) | Good |
| Sulfuric acid (50%) | Discoloration and embrittlement |
| Phosphoric acid (10%) | Good |
| Phosphoric acid (50%) | Discoloration and embrittlement |
| Hydrofluoric acid | Discoloration and embrittlement |
| Sodium hydroxide / potassium hydroxide (10%) | Good |
| Ammonia water (20%) | Good |
| Gasoline / diesel / mineral oil | Good |
| Benzene / toluene | Discoloration and blistering |
We would love to speak with you.
Feel free to reach out using the below details.
Outdoor Non-Intumescent Fireproof Coating for Steel Structure – Outdoor non-intumescent fireproof coating for steel structures.
3 h rating: ≥33 mm; 20–22 kg/m²; 5–6 coats.
Bond strength test result: 0.11 MPa.
Fire test: 33 mm thickness; 5400 mm span; 3.00 h.
Inorganic Zinc-Rich Primer (2K) – Two-component ethyl silicate zinc-rich primer for cathodic protection of blast-cleaned steel.
General-purpose use for bridges, towers, gas holders, oil tanks, oil/gas pipelines, and industrial steel structures.
High zinc dust content with stated water/oil/media resistance and welding/cutting resistance.
Sa 3 surface preparation (not lower than Sa 2.5); touch dry 10 min at 25°C, RH 70–85%.
Special Epoxy Primer (2K) – Two-component special epoxy primer for industrial corrosion protection.
For power, bridge, petrochemical, marine, and port facilities/equipment.
Pot life 2 h (25°C); mix ratio 25:2.5.
Compatible with epoxy MIO intermediate and epoxy/PU topcoat systems.
Epoxy Glass Flake Intermediate Coating (2K) – Two-component epoxy glass flake intermediate coating for heavy-duty barrier protection.
For marine/offshore, chemical areas, underground mines, and wastewater facilities; steel and concrete substrates.
Mix ratio 25:2.5; pot life 4 h (25°C).
Recoat 24 h–7 d (25°C); recommended DFT 60–80 µm per coat.
Protect. Perform. Endure. – Advanced Coatings for Industrial Excellence.
© 2025 All Rights reserved Anhui HUILI Coating Technology Co., Ltd. | Privacy Policy
Chinese