- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
Single-component high-build chlorinated rubber aluminum primer with fast-drying performance and seawater resistance for marine and steel structures. Engineered for ship hulls, waterlines, sluice gates and underground pipelines. Sa2.5 prep, 60µm DFT per coat.
Overview
Single-pack chlorinated rubber aluminium paste high-build anti-rust coating with fast drying and thick film build per coat.
Provides anti-rust performance, water resistance, corrosion resistance, and resistance to wet/dry alternation; applicable for low-temperature construction.
Composition
Formulated with chlorinated rubber resin, plasticizer, aluminium paste, anti-rust pigments, solvents, and additives.
Typical uses
For anti-rust protection of ship bottom, waterline, topside, decks, and superstructures.
Also suitable for sluice gates, underwater steel structures, underground pipelines, gas holders, and other steel structures.
Technical data (typical)
Appearance: Silver white; aluminium red.
Theoretical consumption: 0.22 kg/m² at 60 μm DFT (excluding loss).
Density: 1.35 kg/L.
Drying time (25°C): Surface dry 1 h; hard dry 12 h.
Application data (25°C)
Mixing: Single-pack.
Induction time: None.
Pot life: Unlimited.
Application methods: Airless spray, brush, roller.
Thinner: X-15 chlorinated rubber thinner; dilution 3–7%.
Recoat interval (25°C): Min 12 h; max unlimited.
Recommended coats / DFT: 1 coat 35–50 μm; brush/roller 1 coat 30–40 μm.
Surface preparation
Remove dust, oil, and debris from the previous coat; if beyond maximum recoat interval, consider roughening as needed.
When used as the first coat: blast/shot blast to Sa 2.5 or power-tool cleaning to St 3; surface profile 30–75 μm.
System compatibility / packing / storage
Compatibility: Previous coat—epoxy zinc-rich primer; inorganic zinc-rich primer; epoxy intermediate coating; chlorinated rubber primer.
Compatibility: Topcoats—chlorinated rubber topcoat; acrylic topcoat.
Packing: 20 kg.
Storage: Shelf life 12 months; store in a dry, cool place.
We would love to speak with you.
Feel free to reach out using the below details.
Cementitious non-intumescent fire-resistant coating with 3-hour fire rating for indoor steel structures including stations, warehouses and stadiums. Non-corrosive to steel, smoke-free and non-toxic. Sa2.5 prep, 16–32mm total application thickness.
2K ethyl silicate inorganic zinc-rich primer with high zinc content for maximum cathodic protection on industrial steel. Engineered for bridges, transmission towers & oil pipelines. Weld and cut tolerant, Sa2.5 prep, 40–80µm DFT.
2K C6-modified epoxy MIO intermediate coat engineered to extend coating service life on marine and offshore structures. Pairs with epoxy zinc primer for layered cathodic and barrier protection. 50µm DFT, Sa2.5 prep.
Industrial anti-corrosion and protective coating manufacturer. Direct supply from factory — no agents. ISO 9001 certified. Exporting to 30+ countries.
