- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
Single-component fluorinated PVC coating with outstanding UV resistance, chemical resistance and anti-mold performance for steel and concrete structures in acid, alkali and chemical atmospheres. Fast surface dry in 30 minutes. Sa2.5 or St3 prep required.
Overview
Single-component fluorinated PVC anti-corrosion coating system for chemical atmospheres and alternating dry/wet exposure.
Composition
Modified polyolefin resin with fluorinated modifier, pigments, solvent, additives; single-pack coating series.
Typical uses
Surface protection and decoration for buildings and chemical equipment exposed long-term to acid/alkali/salt chemical gases or alternating dry/wet conditions.
Applicable to steel and concrete structures.
Technical data (typical)
Appearance: primer iron red (shade may vary); intermediate micaceous iron oxide red (grey); topcoat various colors.
Density: 1.2–1.4 kg/L.
Theoretical consumption: 0.15 kg/m² at 40 µm DFT (loss not included).
Drying time (25°C): surface dry 0.5 h; hard dry 24 h; full cure 7 d.
Application data (25°C)
Mixing: single-component (aluminium-pigmented series: A:B = 5:1).
Induction time: none.
Pot life: unlimited.
Application methods: airless spray, brush, roller.
Thinner: dedicated thinner, 3–8%.
Recoat interval: 12 h; max unlimited.
Recommended DFT per coat: 35–60 µm (brush/roller 30–45 µm).
System: GCF primer + intermediate + topcoat.
Surface preparation
Steel: blast to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
System compatibility / packing / storage
System compatibility: GCF fluorinated PVC primer + intermediate + topcoat.
Packing: 20 kg.
Storage: dry, cool, ventilated; away from fire; avoid strong sunlight; no outdoor storage.
Shelf life: 12 months.
We would love to speak with you.
Feel free to reach out using the below details.
2K alkyl silicate inorganic zinc primer delivering cathodic protection with weld and cut tolerance on structural steel. Suited for low-temperature application with universal topcoat compatibility. Sa2.5 prep required, 30µm DFT.
2K epoxy sealer primer engineered for deep penetration and encapsulation of concrete and cement substrates. Seals and stabilizes surfaces to optimize adhesion for subsequent coating systems. Surface dry in 1 hour, full cure in 7 days.
Single-component epoxy ester primer engineered for anti-corrosive protection on ferrous metals. Suited for coastal and high-humidity industrial environments. Air-dry or low-temperature bake cure, 25–30µm DFT per coat.
