- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
2K cold-applied zinc-rich primer offering cathodic protection equivalent to thermal spray zinc for steel structures. Weld and cut tolerant with universal organic and inorganic topcoat compatibility. 25–30µm DFT, surface dry in 5 minutes.
Overview
Single-component cold galvanizing zinc-rich anti-rust anti-corrosion coating for steel structures, used as a primer where thermal spray zinc is not convenient.
Composition
Polyolefin resin, ultra-fine zinc powder, light-colored composite anti-rust pigments, additives, solvent.
Typical uses
Anti-corrosion primer for steel structures, especially where thermal spray zinc is not practical.
Technical data (typical)
Appearance: grey.
Theoretical consumption: 0.36 kg/m² at 50 µm DFT (loss not included).
Density: 3.0 kg/L.
Drying time (25°C): surface dry 10 min; hard dry 12 h; full cure 7 d.
Application data (25°C)
Mixing: single-component.
Induction time: none.
Pot life: unlimited.
Application methods: airless spray, brush.
Thinner: dedicated thinner, 3–9%.
Recoat interval: min 12 h; max unlimited.
Recommended DFT per coat: 60–80 µm (brush 40–50 µm).
Compatible topcoats: epoxy micaceous iron oxide intermediate coating, polyurethane topcoat, acrylic topcoat, etc.
Surface preparation
Steel: blast to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
System compatibility / packing / storage
System compatibility: epoxy MIO intermediate coating, polyurethane topcoat, acrylic topcoat.
Packing: 30 kg.
Storage: dry, cool, ventilated; away from fire; avoid strong sunlight; no outdoor storage.
Shelf life: 6 months.
We would love to speak with you.
Feel free to reach out using the below details.
2K high-build epoxy topcoat with high-solids formulation for heavy-duty corrosion protection on steel and concrete. Outstanding chemical, solvent and water resistance. 60µm DFT per coat, 2-coat system to 120µm.
Cementitious non-intumescent fire-resistant coating with 3-hour fire rating for indoor steel structures including stations, warehouses and stadiums. Non-corrosive to steel, smoke-free and non-toxic. Sa2.5 prep, 16–32mm total application thickness.
2K C6-modified epoxy MIO intermediate coat engineered to extend coating service life on marine and offshore structures. Pairs with epoxy zinc primer for layered cathodic and barrier protection. 50µm DFT, Sa2.5 prep.
Industrial anti-corrosion and protective coating manufacturer. Direct supply from factory — no agents. ISO 9001 certified. Exporting to 30+ countries.
