- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
Single-component perchlorovinyl anti-corrosive coating system covering primer and topcoat for machinery, metal structures and concrete. Fast-drying with good weathering and corrosion resistance. Sa2.5 prep, 120µm+ total DFT system.
Overview
Single-component perchloroethylene anti-corrosion coating system (primer/topcoat) with fast drying and relatively high hardness.
Provides weather resistance and corrosion resistance; suitable for low-temperature application.
Composition
Formulated with perchloroethylene resin, modified resin, pigments, extenders, plasticizer, and mixed solvents.
Typical uses
Anti-corrosion for mechanical equipment, metal structures, and concrete surfaces.
Technical data (typical)
Appearance: Primer—red iron oxide; topcoat—various colors.
Theoretical consumption: Primer 0.18 kg/m²; topcoat 0.2 kg/m²; both at 50 μm DFT (excluding loss).
Density: Primer 1.4 kg/L; topcoat 1.2 kg/L.
Drying time (25°C): Surface dry 1 h; hard dry 24 h.
Application data (25°C)
Mixing: Single-component.
Induction time: None.
Pot life: Unlimited.
Application methods: Airless spray, brush, roller.
Thinner: X-1 thinner; dilution 3–7%.
Recoat interval (25°C): Min 12 h; max unlimited.
Recommended coats / DFT: 1 coat 40–60 μm; brush/roller 1 coat 30–40 μm.
Surface preparation
Steel: blast/shot blast to Sa 2.5, or power-tool cleaning to St 3.
Surface profile: 30–75 μm.
System compatibility / packing / storage
Compatibility: PLG52 system—anti-corrosion primer + topcoat.
Packing: 20 kg.
Storage: Shelf life 12 months; store dry/cool/ventilated, away from fire and direct sunlight; no outdoor stacking.
We would love to speak with you.
Feel free to reach out using the below details.
Single-component water-based intumescent coating delivering a 2-hour fire rating for indoor steel structures and building frames. Non-toxic, low-VOC formulation with strong adhesion. Sa2.5 prep required, 1.7–3.3mm application thickness.
2K special epoxy primer with outstanding adhesion and impact resistance for demanding industrial applications. Engineered for power plants, bridges & petrochemical facilities. Compatible with all topcoat systems, 60µm DFT per coat.
2K C6-modified epoxy MIO intermediate coat engineered to extend coating service life on marine and offshore structures. Pairs with epoxy zinc primer for layered cathodic and barrier protection. 50µm DFT, Sa2.5 prep.
Industrial anti-corrosion and protective coating manufacturer. Direct supply from factory — no agents. ISO 9001 certified. Exporting to 30+ countries.
