- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
Single-component acrylic road marking coating with fast-drying, abrasion-resistant film for highways, urban roads, parking lots and factory floors. High-visibility white, yellow and red available. Brush, roller and airless spray application.
Overview
Single-component road marking coating with fast drying and abrasion resistance for traffic line marking.
Composition
Acrylic resin, chlorinated polyolefin resin, pigments, fillers, functional additives, solvent, additives.
Typical uses
Road marking for highways and urban roads, parking lots, and factory roads for demarcation and high visibility.
Technical data (typical)
Appearance: various colors, mainly white and yellow.
No-track time: ≤20 min.
Theoretical consumption: 1.2 kg/m² at 500 µm DFT (loss not included).
Density: 1.4 kg/L.
Application data (25°C)
Mixing: single-component.
Induction time: none.
Pot life: unlimited.
Application methods: high-pressure airless spray, brush, roller.
Thinner: dedicated thinner, 2–6%.
Recoat interval: min 6 h; max unlimited.
System compatibility: compatible with this coating.
Surface preparation
Pavement surface: clean, dry, free of oil and debris.
System compatibility / packing / storage
Packing: 20 kg.
Storage: dry, cool, ventilated; away from fire; avoid strong sunlight; no outdoor storage.
Shelf life: 12 months.
We would love to speak with you.
Feel free to reach out using the below details.
Single-component water-based intumescent coating with 2-hour fire rating and outstanding weathering resistance for exterior steel structures. Resistant to UV, salt spray, freeze-thaw and acid-alkali exposure. Sa2.5 prep, 1.7–3.2mm application thickness.
Single-component water-based intumescent coating delivering a 2-hour fire rating for indoor steel structures and building frames. Non-toxic, low-VOC formulation with strong adhesion. Sa2.5 prep required, 1.7–3.3mm application thickness.
2K epoxy sealer primer engineered for deep penetration and encapsulation of concrete and cement substrates. Seals and stabilizes surfaces to optimize adhesion for subsequent coating systems. Surface dry in 1 hour, full cure in 7 days.
