- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
2K modified epoxy furan coating with outstanding water resistance and chemical barrier performance for steel and concrete in immersion and heavy chemical environments. Suited as primary coating or intermediate coat. 150µm DFT per coat.
Overview
Two-component modified epoxy furan coating for long-term heavy-duty corrosion protection in wet or chemical environments.
Composition
Epoxy furan resin, pigments, solvent, additives; modified amine hardener; supplied as Part A & Part B.
Typical uses
Long-term heavy-duty protection for steel structures and concrete facilities in underwater or humid environments and heavy chemical areas.
Can also be used as an intermediate coating.
Technical data (typical)
Appearance: various colors.
Theoretical consumption: 0.16 kg/m² at 50 µm DFT (loss not included).
Density: 1.25 kg/L.
Drying time (25°C): surface dry 2 h; hard dry 24 h; full cure 7 d.
Salt water resistance: 1 year, no film change.
Application data (25°C)
Mixing ratio (A:B): 20:4.
Induction time: 5 min.
Pot life: 4 h.
Application methods: airless spray, brush, roller.
Thinner: dedicated thinner, 3–8% (more for air spray/roller).
Recoat interval: min 12 h; max 7 d.
Recommended DFT per coat: 60–80 µm (brush 40–50 µm).
System: modified epoxy furan primer + topcoat.
Surface preparation
Steel: blast to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
System compatibility / packing / storage
System compatibility: modified epoxy furan primer + modified epoxy furan topcoat.
Packing: Part A 20 kg; Part B 4 kg.
Storage: dry, cool, ventilated; away from fire; avoid strong sunlight; no outdoor storage.
Shelf life: 12 months.
We would love to speak with you.
Feel free to reach out using the below details.
Single-component water-based intumescent coating with 2-hour fire rating and outstanding weathering resistance for exterior steel structures. Resistant to UV, salt spray, freeze-thaw and acid-alkali exposure. Sa2.5 prep, 1.7–3.2mm application thickness.
2K epoxy sealer primer engineered for deep penetration and encapsulation of concrete and cement substrates. Seals and stabilizes surfaces to optimize adhesion for subsequent coating systems. Surface dry in 1 hour, full cure in 7 days.
2K C6-modified epoxy MIO intermediate coat engineered to extend coating service life on marine and offshore structures. Pairs with epoxy zinc primer for layered cathodic and barrier protection. 50µm DFT, Sa2.5 prep.
