- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
2K heat-resistant epoxy phenolic coating with outstanding water resistance, chemical resistance and high-temperature performance for marine and chemical service. Suited for storage tanks, pipelines and chemical process equipment. Ambient cure, Sa2.5 prep required.
Overview
Two-component heat-resistant epoxy phenolic coating with ambient-temperature curing.
Composition
Phenolic epoxy resin, pigments, solvent, additives; supplied as Part A & Part B.
Typical uses
Corrosion protection for facilities/equipment in seawater, groundwater, and fresh water service.
Also suitable for chemical equipment, pipelines, and tanks.
Technical data (typical)
Appearance: primer grey/iron red/reddish brown; topcoat black/medium grey, etc.
Theoretical consumption: 0.16 kg/m² at 60 µm DFT (loss not included).
Density: 1.4 kg/L.
Drying time (25°C): surface dry 1 h; hard dry 24 h; full cure 7 d.
Heat resistance: 250°C @ 4 h.
Application data (25°C)
Mixing ratio (A:B): 24:3.
Induction time: 5 min.
Pot life: 40 min.
Application methods: airless spray, brush, roller.
Thinner: X-7 epoxy thinner, 3–8%.
Recoat interval: min 24 h; max 7 d.
Recommended DFT per coat: 60–90 µm (brush 40–55 µm).
Surface preparation
Steel: blast to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
System compatibility / packing / storage
System compatibility: PLFH-4 epoxy phenolic primer + epoxy phenolic topcoat.
Packing: Part A 24 kg; Part B 3 kg.
Storage: dry, cool, ventilated; away from fire; avoid strong sunlight; no outdoor storage.
Shelf life: 12 months.
We would love to speak with you.
Feel free to reach out using the below details.
2K epoxy enamel with a porcelain-smooth, abrasion-resistant film for decorative heavy-duty corrosion protection on steel and concrete. Chemical, oil and moisture resistant. 30µm DFT per coat, 3-coat system to 100µm.
Cementitious non-intumescent fire-resistant coating with 3-hour fire rating for indoor steel structures including stations, warehouses and stadiums. Non-corrosive to steel, smoke-free and non-toxic. Sa2.5 prep, 16–32mm total application thickness.
Single-component water-based intumescent coating delivering a 2-hour fire rating for indoor steel structures and building frames. Non-toxic, low-VOC formulation with strong adhesion. Sa2.5 prep required, 1.7–3.3mm application thickness.
