- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
2K epoxy polyamide waterline coating with outstanding wet-dry cycling resistance, abrasion resistance and water and heat resistance for ship hull waterline protection. High-build film formation. 80–100µm total DFT per 2-coat system.
Overview
Two-component epoxy waterline coating for steel hull areas requiring thick-film build and wet/dry cycling resistance.
Performance focus: water resistance, damp-heat corrosion resistance, hardness, abrasion resistance, and wave impact resistance.
Composition
Modified epoxy resin with premium pigments, solvent, additives, and polyamide adduct curing agent; Part A & Part B.
Typical uses
Protection and decoration for waterline area substrates.
Technical data (typical)
Appearance: iron red, purple red.
Theoretical consumption: 0.16 kg/m² at 50 µm DFT (loss not included).
Density: 1.4 kg/L.
Drying time (25℃): surface dry 1 h; hard dry 24 h; full cure 7 d.
Application data (25°C)
Mixing ratio (Part A:Part B): 24:3.
Induction time: 5 min at 25℃.
Pot life: 4 h at 25℃.
Application methods: airless spray, brush, roller.
Thinner: X-7 epoxy thinner, 2–8% (higher for air spray/roller).
Recoat interval: min 24 h; max 7 d.
Recommended coats/DFT: 1 coat 40–80 µm; brush/roller 1 coat 30–40 µm.
Recommended system: epoxy primer + epoxy intermediate coating.
Surface preparation
Over primer: surfaces must be clean, dry, and free of contamination; roughen if maximum recoat interval exceeded.
As first primer: blast-clean steel to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
System compatibility / packing / storage
Compatibility: used with epoxy primer and epoxy intermediate coating; apply at 5–35℃ and RH ≤85%, avoid rain/snow/strong wind (>6.7 m/s)/heavy fog/intense sunlight.
Packing: Part A 24 kg; Part B 3 kg.
Storage: store in a dry, cool, ventilated warehouse; keep away from fire sources; avoid strong sunlight; no outdoor stacking; shelf life 12 months.
We would love to speak with you.
Feel free to reach out using the below details.
Cementitious hydrocarbon fire-resistant coating engineered for petrochemical and oil refining facilities exposed to hydrocarbon flame. Impact-resistant and crack-resistant with outstanding weathering performance. Sa2.5 prep, 24–33mm total application thickness.
Single-component water-based intumescent coating delivering a 2-hour fire rating for indoor steel structures and building frames. Non-toxic, low-VOC formulation with strong adhesion. Sa2.5 prep required, 1.7–3.3mm application thickness.
2K epoxy zinc phosphate primer with outstanding saltwater resistance and adhesion for heavy industrial applications. Engineered for port facilities, mining equipment & hydraulic steel in aggressive environments. Sa2.5 prep required, iron red or gray finish.
Industrial anti-corrosion and protective coating manufacturer. Direct supply from factory — no agents. ISO 9001 certified. Exporting to 30+ countries.
