PL842 Chlorinated Rubber Deck Coating

Overview
Chlorinated rubber deck coating for steel and wood deck surfaces requiring abrasion resistance and slip resistance.
Film emphasizes wear resistance, water resistance, oil resistance, and weathering performance with secure adhesion for ship deck applications.

Composition
Chlorinated rubber resin with modified alkyd resin, premium pigments, toughening agent, solvent, and additives.

Typical uses
Protection and slip-resistant coating for ship decks.

Technical data (typical)

• Appearance: various colors.

• Theoretical consumption: 0.14 kg/m² at 40 µm DFT (loss not included).

• Density: 1.3 kg/L.

• Drying time (25℃): surface dry 1 h; hard dry 24 h; full cure 7 d.

Application data (25°C)

• Mixing ratio: single-pack.

• Induction time: none.

• Pot life: unlimited.

• Application methods: airless spray, brush, roller.

• Thinner: 101 thinner, 3–8%.

• Recoat interval: min 8 h; max unlimited.

• Recommended coats/DFT: 1 coat 35–50 µm; brush/roller 1 coat 30–40 µm.

• Recommended undercoats: epoxy primer; chlorinated rubber antirust coating; chlorinated rubber intermediate coating.

Surface preparation
Over existing coating: remove dust, oil, and debris; roughen as needed if maximum recoat interval is exceeded.
As first coat: blast-clean steel to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.

System compatibility / packing / storage

• Compatibility: compatible over epoxy primer and chlorinated rubber systems; suitable for low-temperature application; apply at RH ≤85%, avoid rain/snow/strong wind (>6.7 m/s)/heavy fog/intense sunlight.

• Packing: 20 kg.

• Storage: store in a dry, cool, ventilated warehouse; keep away from fire sources; avoid strong sunlight; no outdoor stacking; shelf life 12 months.