- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
Single-component anti-mold coating inhibiting over 10 mold species including Aspergillus niger and A. flavus for food processing, brewing and pharmaceutical facility interiors. Non-fading, scrub-resistant. Service life 10x standard coatings.
Overview
Functional protective coating for interior walls to inhibit mold growth in workshops with mildew risk.
Composition
Chlorinated polyolefin resin, high-efficiency anti-mildew additive, pigments/fillers.
Typical uses
Interior walls of workshops and plants in industries prone to mildew, including beer, pastry, soy products, brewing, beverages, dairy, meat products, fast food, and pharmaceuticals.
Technical data (typical)
Adhesion: adhesive tape method, 100% no peeling.
Theoretical consumption: 0.2 kg/m² at 50 µm DFT (loss not included).
Density: 1.3 kg/L.
Drying time: base coat surface dry 2 h, hard dry 20 h; finish coat surface dry 0.5 h, hard dry 10 h.
Film appearance: various colors, smooth and glossy.
Damp-heat and freeze-thaw resistance: temperature -40°C to 47°C; at 47°C and RH >95%, film unchanged after 7 d.
Alkali resistance: 10% NaOH immersion 240 h, film unchanged.
Acid resistance: 5% H2SO4 immersion 72 h, film unchanged.
Film hardness: pencil 5H.
Scrub resistance: wet cloth with 200 g load, wet scrub ≥2000 cycles.
Application data (25°C)
Surface preparation
System compatibility / packing / storage
Packing: 20 kg.
Storage: dry, cool, ventilated; away from fire and heat sources; avoid strong sunlight; no outdoor storage.
Shelf life: 12 months.
We would love to speak with you.
Feel free to reach out using the below details.
Cementitious non-intumescent fire-resistant coating with 3-hour fire rating for indoor steel structures including stations, warehouses and stadiums. Non-corrosive to steel, smoke-free and non-toxic. Sa2.5 prep, 16–32mm total application thickness.
Single-component epoxy ester primer engineered for anti-corrosive protection on ferrous metals. Suited for coastal and high-humidity industrial environments. Air-dry or low-temperature bake cure, 25–30µm DFT per coat.
2K C6-modified epoxy MIO intermediate coat engineered to extend coating service life on marine and offshore structures. Pairs with epoxy zinc primer for layered cathodic and barrier protection. 50µm DFT, Sa2.5 prep.
