- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
Single-component alkyd iron oxide primer with good adhesion and corrosion resistance for ferrous metal substrates. Compatible with nitrocellulose, alkyd and phenolic topcoat systems. Sa2.5 prep, 50–60µm DFT per 2-coat system.
Overview
Single-pack alkyd anti-corrosion primer for steel structures where adhesion and rust inhibition are primary requirements.
Film focuses on adhesion to steel and compatibility with alkyd topcoats for general structural steel applications.
Composition
Alkyd resin with iron oxide red, anti-rust pigments, extender pigments, anti-settling agents, solvent, and driers.
Typical uses
Anti-rust primer for steel structure facilities.
Technical data (typical)
Appearance: iron red, orange red.
Theoretical consumption: 0.14 kg/m² at 40 µm DFT (loss not included).
Density: 1.4 kg/L.
Drying time (25℃): surface dry 5 h; hard dry 24 h; full cure 7 d.
Application data (25°C)
Mixing ratio: single-pack.
Induction time: none.
Pot life: unlimited.
Application methods: airless spray, brush, roller.
Thinner: X-6 alkyd thinner, 3–9%.
Recoat interval: min 24 h; max 7 d.
Recommended coats/DFT: 1 coat 30–50 µm (spray); brush/roller 1 coat 30–40 µm.
Recommended subsequent coats: alkyd topcoat; alkyd enamel coating.
Surface preparation
Steel: blast-clean or spray-clean to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
System compatibility / packing / storage
System compatibility: primer under alkyd topcoat and alkyd enamel coating for steel structures.
Construction conditions: RH ≤85%; 5–35℃; avoid rain/snow, strong wind (>6.7 m/s), heavy fog, intense sunlight.
Storage: dry, cool, ventilated warehouse away from fire sources; avoid strong sunlight; no outdoor stacking; shelf life 12 months.
Packing: 25 kg.
We would love to speak with you.
Feel free to reach out using the below details.
2K special epoxy primer with outstanding adhesion and impact resistance for demanding industrial applications. Engineered for power plants, bridges & petrochemical facilities. Compatible with all topcoat systems, 60µm DFT per coat.
Single-component epoxy ester primer engineered for anti-corrosive protection on ferrous metals. Suited for coastal and high-humidity industrial environments. Air-dry or low-temperature bake cure, 25–30µm DFT per coat.
2K epoxy MIO primer and intermediate coat with lamellar barrier structure for aggressive environments. Engineered for shipbuilding, bridges & port machinery. Single airless spray pass achieves 60–80µm DFT.
Industrial anti-corrosion and protective coating manufacturer. Direct supply from factory — no agents. ISO 9001 certified. Exporting to 30+ countries.
