Acrylic enamel coating for weatherable, hard decorative finishing on steel.
Vehicles, machinery, steel structures, metal products.
0.10 kg/m² at 25 µm; recoat ≥2 h.
Compatible over acrylic, chlorinated, or epoxy primers.
Overview
Acrylic enamel coating for steel substrates on vehicles, machinery, and steel structures where high hardness and weatherability are required.
Performance focus: fast drying, adhesion, hardness, long-term color/gloss retention, and salt spray / damp-heat resistance.
Composition
Acrylic resin with weather-resistant pigments, additives, and solvent.
Typical uses
Surface decoration for automobiles, construction machinery, mining machinery, agricultural machinery, metal products, and steel structures.
Technical data (typical)
Appearance: various colors.
Theoretical consumption: 0.10 kg/m² at 25 µm DFT (loss not included).
Drying time (25℃): surface dry ≤0.5 h; hard dry ≤3 h.
Salt water resistance: 60 h, no blistering or peeling; slight color change allowed.
Application data (25°C)
Mixing ratio: single-pack.
Application methods: air spray, high-pressure airless spray, electrostatic spray.
Thinner: acrylic thinner.
Recoat interval: min 2 h; max unlimited.
Recommended primers: acrylic primer; high-chlorinated polyethylene primer; chlorosulfonated polyethylene primer; epoxy primer.
Application conditions: suitable for low-temperature application; do not apply in rain/fog/snow or RH >85%; avoid strong sunlight in hot seasons.
Surface preparation
Over primer: surfaces must be clean, dry, and free of contamination.
As first primer: blast-clean to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
System compatibility / packing / storage
Compatibility: compatible over acrylic, high-chlorinated polyethylene, chlorosulfonated polyethylene, or epoxy primers.
Packing: 22 kg.
Storage: dry, cool, ventilated warehouse; keep away from ignition and heat sources; shelf life 12 months.
We would love to speak with you.
Feel free to reach out using the below details.
Indoor Intumescent Fireproof Coating for Steel Structure – Waterborne intumescent coating for indoor steel fire protection.
2 h rating: ≥3.3 mm; 4.6 kg/m² theoretical consumption.
Water-thinnable; max dilution 5%.
Bond strength test result: 0.82 MPa.
Inorganic Zinc-Rich Primer (2K) – Two-component ethyl silicate zinc-rich primer for cathodic protection of blast-cleaned steel.
General-purpose use for bridges, towers, gas holders, oil tanks, oil/gas pipelines, and industrial steel structures.
High zinc dust content with stated water/oil/media resistance and welding/cutting resistance.
Sa 3 surface preparation (not lower than Sa 2.5); touch dry 10 min at 25°C, RH 70–85%.
Epoxy Sealer Primer (2K) – Two-component penetrating sealer primer for porous substrates.
For cement mortar, concrete, and fiber cement boards; also stated for wood.
Concrete moisture content < 6% before application (as stated).
Mix ratio 16:4; theoretical consumption 0.29 kg/m² at 50 µm DFT.
Epoxy Glass Flake Intermediate Coating (2K) – Two-component epoxy glass flake intermediate coating for heavy-duty barrier protection.
For marine/offshore, chemical areas, underground mines, and wastewater facilities; steel and concrete substrates.
Mix ratio 25:2.5; pot life 4 h (25°C).
Recoat 24 h–7 d (25°C); recommended DFT 60–80 µm per coat.
Protect. Perform. Endure. – Advanced Coatings for Industrial Excellence.
© 2025 All Rights reserved Anhui HUILI Coating Technology Co., Ltd. | Privacy Policy
Chinese