- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
Single-component acrylic primer with fast-drying film and excellent water resistance for automotive, construction machinery, mining equipment and steel structures. Compatible with acrylic enamel topcoats. Low-temperature cure, Sa2.5 prep, 25µm DFT.
Overview
Acrylic anti-corrosion primer for steel substrates on vehicles, machinery, and steel structures where fast drying and rust inhibition are required.
Performance focus: rapid drying, water resistance, anti-rust protection, and adhesion, with suitability for low-temperature application.
Composition
Acrylic resin with anti-rust pigments, fillers, and additives.
Typical uses
Anti-rust primer for automobiles, construction machinery, mining machinery, agricultural machinery, metal products, and steel structures.
Technical data (typical)
Appearance: iron red, light yellow.
Theoretical consumption: 0.15 kg/m² at 25 µm DFT (loss not included).
Drying time (23℃): surface dry 0.5 h; hard dry 6 h.
Salt water resistance: 72 h, no blistering or peeling; slight color change allowed.
Alkali resistance: 72 h, no blistering or peeling; slight color change allowed.
Application data (25°C)
Mixing ratio: single-pack.
Application methods: spray, brush.
Thinner: acrylic thinner.
Recoat interval: min 2 h; max unlimited.
Recommended subsequent coats: acrylic enamel coating; chlorinated ether topcoat.
Application conditions: RH ≤85%; 5–35℃; avoid rain/snow/fog, strong wind (>6.7 m/s), heavy fog, intense sunlight.
Surface preparation
Steel: blast-clean to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
System compatibility / packing / storage
Compatibility: compatible with acrylic enamel coating and chlorinated ether topcoat.
Packing: 25 kg.
Storage: shelf life 12 months.
We would love to speak with you.
Feel free to reach out using the below details.
2K epoxy glass flake coating with exceptional chemical resistance and abrasion resistance for severe corrosive environments. Engineered for offshore structures, chemical plants & wastewater facilities. Achieves up to 300µm DFT in heavy-duty applications.
Single-component epoxy ester primer engineered for anti-corrosive protection on ferrous metals. Suited for coastal and high-humidity industrial environments. Air-dry or low-temperature bake cure, 25–30µm DFT per coat.
2K C6-modified epoxy MIO intermediate coat engineered to extend coating service life on marine and offshore structures. Pairs with epoxy zinc primer for layered cathodic and barrier protection. 50µm DFT, Sa2.5 prep.
