PLSX-12 Waterborne Fluorocarbon Coating

Overview
Waterborne fluorocarbon coating for exterior concrete and building materials where long-term weatherability and color/gloss retention are critical.
Suitable for building walls and roofs requiring durable decorative protection with easy-to-clean, low-VOC film.

Composition
Fluorocarbon emulsion as main binder with pigments, fillers, and additives; single-component waterborne system using water as thinner.

Typical uses
Super-durable decorative and protective coating for various building exterior walls, roofs, and construction materials, significantly extending building service life.

Technical data (typical)

• Appearance: various colors.

• Theoretical consumption: 0.15 kg/m² at 50 µm DFT (loss not included).

• Drying time (25℃): surface dry 1.5 h; hard dry 24 h; full cure 7 d.

Application data (25°C)

• Application methods: spray, brush, roller.

• Thinner: clean water, 5–10%.

• Recoat interval: ≥2 h.

• Recommended system: 1 primer coat / 2 topcoats.

Surface preparation
Substrate surface must be clean, dry, flat, and sound; concrete moisture content ≤8% and pH ≤10.

System compatibility / packing / storage

• System compatibility: applied over appropriate primers and putty systems for exterior concrete and building panels.

• Storage: dry, cool, ventilated warehouse; 5–35℃; avoid strong sunlight; strictly no outdoor stacking.

• Shelf life: 12 months.