- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
Single-component water-based acrylic topcoat with fast-drying, tough film and strong adhesion for automotive chassis, steel structures, guardrails and pipelines. Low-VOC, suited for indoor and outdoor applications. Sa2.5 prep, 50µm DFT per coat.
Overview
Waterborne acrylic anti-corrosion topcoat for interior and exterior steel components with low VOC.
Composition
Acrylic resin dispersion with pigments, additives, and functional fillers; water as thinner.
Typical uses
Anti-rust and decorative coating for automotive chassis, locomotives, steel structures, guardrails, pipelines, and similar indoor/outdoor facilities and equipment.
Technical data (typical)
Appearance: various colors.
Density: 1.3 kg/L.
Theoretical consumption: 0.14 kg/m² at 50 µm DFT (loss not included).
Drying time (25℃): surface dry 1 h; hard dry 24 h; full dry 7 d.
Application data (25°C)
Application methods: spray, brush, roller.
Thinner: clean water, 10–25%.
Recoat interval: min 24 h.
Surface preparation
When applied over primer: surfaces must be clean, dry, and free of contamination; roughen if maximum recoat interval is exceeded.
When used as first primer: blast steel to Sa 2.5 or power-tool clean to St 3 with 30–75 µm profile.
System compatibility / packing / storage
Construction conditions: ambient 5–35℃; RH ≤85%; not suitable in rain, snow, strong wind, heavy fog, or intense sun.
Storage: dry, cool, ventilated; 5–35℃; avoid strong sunlight; no outdoor storage.
Shelf life: 6 months.
We would love to speak with you.
Feel free to reach out using the below details.
2K epoxy enamel with a porcelain-smooth, abrasion-resistant film for decorative heavy-duty corrosion protection on steel and concrete. Chemical, oil and moisture resistant. 30µm DFT per coat, 3-coat system to 100µm.
Cementitious hydrocarbon fire-resistant coating engineered for petrochemical and oil refining facilities exposed to hydrocarbon flame. Impact-resistant and crack-resistant with outstanding weathering performance. Sa2.5 prep, 24–33mm total application thickness.
Single-component water-based intumescent coating with 2-hour fire rating and outstanding weathering resistance for exterior steel structures. Resistant to UV, salt spray, freeze-thaw and acid-alkali exposure. Sa2.5 prep, 1.7–3.2mm application thickness.
Industrial anti-corrosion and protective coating manufacturer. Direct supply from factory — no agents. ISO 9001 certified. Exporting to 30+ countries.
