- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
Single-component vinyl chloride ether anti-corrosive coating with excellent weathering, seawater and chemical resistance for ships, containers, port machinery and steel bridges. Low-temperature cure, fast-drying. 35µm DFT per coat.
Overview
Single-pack chlorinated ether anti-corrosion coating system supplied as primer and topcoat.
Composition
Chlorinated ether resin, pigments, plasticizer, thixotropic agent, surface additives, solvent.
Typical uses
Anti-corrosion for ships, containers, port machinery, mine equipment, gas holders, steel structure bridges, and steel/concrete facilities and equipment.
Technical data (typical)
Appearance: various colors.
Theoretical consumption: primer 0.17 kg/m² at 50 µm DFT (loss not included).
Theoretical consumption: topcoat 0.2 kg/m² at 50 µm DFT (loss not included).
Density: primer 1.4 kg/L; topcoat 1.25 kg/L.
Drying time (25°C): surface dry 1 h; hard dry 8 h; full cure 7 d.
Application data (25°C)
Mixing: single-pack.
Induction time: none.
Pot life: unlimited.
Application methods: airless spray, brush, roller.
Thinner: dedicated thinner, 3–8%.
Recoat interval: min 12 h; max unlimited.
Recommended DFT per coat: 30–50 µm (brush/roller 30–40 µm).
System: chlorinated ether primer + chlorinated ether topcoat.
Surface preparation
Steel: blast to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
System compatibility / packing / storage
System compatibility: chlorinated ether primer + chlorinated ether topcoat.
Packing: 20 kg.
Storage: dry, cool, ventilated; away from fire; avoid strong sunlight; no outdoor storage.
Shelf life: 12 months.
We would love to speak with you.
Feel free to reach out using the below details.
Cementitious non-intumescent fire-resistant coating with 3-hour fire rating for indoor steel structures including stations, warehouses and stadiums. Non-corrosive to steel, smoke-free and non-toxic. Sa2.5 prep, 16–32mm total application thickness.
2K C6-modified epoxy MIO intermediate coat engineered to extend coating service life on marine and offshore structures. Pairs with epoxy zinc primer for layered cathodic and barrier protection. 50µm DFT, Sa2.5 prep.
2K epoxy MIO primer and intermediate coat with lamellar barrier structure for aggressive environments. Engineered for shipbuilding, bridges & port machinery. Single airless spray pass achieves 60–80µm DFT.
