- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
Single-component cyanoacrylate penetrating waterproofing coating with low viscosity and outstanding anti-corrosive and anti-mold performance for concrete structures. Suited for cooling towers, wastewater pools and underground facilities. 30µm DFT, 120µm+ total system.
Overview
Single-component cyanate waterproof coating for waterproofing and damp-proofing on building structures.
Composition
Cyanate prepolymer, adhesion promoter, pigments, sealing additive, solvent, catalyst.
Typical uses
Waterproofing and damp-proofing for cooling tower internal walls, sewage tanks, and basements.
Can be used in systems with epoxy and polyurethane coatings.
Technical data (typical)
Appearance: brown.
Theoretical consumption: 0.16 kg/m² at 50 µm DFT (loss not included).
Density: topcoat 1.27 kg/L.
Drying time (25°C): surface dry 1 h; hard dry 24 h; full cure 7 d.
Application data (25°C)
Mixing: single-component.
Induction time: none.
Pot life: unlimited.
Application methods: airless spray, brush, roller.
Thinner: cyanate thinner, 3–7%.
Recoat interval: min 12 h; max 7 d.
Recommended DFT per coat: 40–60 µm (brush/roller 30–40 µm).
Surface preparation
Steel: blast to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
Concrete: sound and dry; moisture content ≤6%; clean and free of oil/dirt; repair defects before coating.
System compatibility / packing / storage
System compatibility: cyanate waterproof primer + cyanate waterproof topcoat.
Packing: 25 kg.
Storage: dry, cool, ventilated; away from fire; avoid strong sunlight; no outdoor storage.
Shelf life: 12 months.
We would love to speak with you.
Feel free to reach out using the below details.
Single-component water-based intumescent coating with 2-hour fire rating and outstanding weathering resistance for exterior steel structures. Resistant to UV, salt spray, freeze-thaw and acid-alkali exposure. Sa2.5 prep, 1.7–3.2mm application thickness.
Single-component epoxy ester primer engineered for anti-corrosive protection on ferrous metals. Suited for coastal and high-humidity industrial environments. Air-dry or low-temperature bake cure, 25–30µm DFT per coat.
2K epoxy zinc-rich primer engineered for cathodic protection on structural steel. Suited for shipbuilding, bridges & oil tanks in aggressive environments. Sa2.5 prep required, 35–40µm DFT.
Industrial anti-corrosion and protective coating manufacturer. Direct supply from factory — no agents. ISO 9001 certified. Exporting to 30+ countries.
