- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
2K high-build epoxy topcoat with high-solids formulation for heavy-duty corrosion protection on steel and concrete. Outstanding chemical, solvent and water resistance. 60µm DFT per coat, 2-coat system to 120µm.
PLH52-2 Epoxy High-Build Topcoat is a two-component epoxy high-build topcoat with high corrosion resistance and high solids, designed for thicker film build per coat. This coating is intended for heavy-duty corrosion protection on steel structures and concrete surfaces.
It is composed of epoxy resin, weather-resistant pigments, additives, solvents, and a polyamine compound curing agent, and is supplied as Part A and Part B. The product is described as having good chemical stability and resistance to oil, water, and solvents, plus electrical insulation properties.
Designed for thicker film build per coat.
Suitable for heavy-duty corrosion protection on steel structures and concrete surfaces.
Has good chemical stability.
Has resistance to oil, water, and solvents.
Provides electrical insulation properties.
This coating is suitable for a wide range of steel and concrete protection projects in industrial environments.
Steel structures requiring heavy-duty corrosion protection.
Concrete surfaces requiring heavy-duty corrosion protection.
Over a two-component primer, the surface must be clean, dry, and free of contaminants; abrade if maximum recoat interval is exceeded. As first coat on steel, blast to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
Storage
Store in a dry, cool, ventilated place away from ignition sources and direct sunlight; no outdoor storage.
Compatible undercoats include inorganic zinc primer, epoxy zinc-rich primer, and epoxy MIO intermediate coating. Other compatible undercoats may also be used where applicable.
This product is a two-component epoxy high-build topcoat supplied as Part A and Part B.
This coating is used for steel structures and concrete surfaces.
This coating can be applied by airless spray, brush, or roller.
The recommended dry film thickness is 50–80 µm per coat, or 30–50 µm per coat by brush/roller.
The recoat interval is minimum 24 h and maximum 7 days.
Compatible undercoats include inorganic zinc primer, epoxy zinc-rich primer, and epoxy MIO intermediate coating.
We would love to speak with you.
Feel free to reach out using the below details.
Single-component water-based intumescent coating with 2-hour fire rating and outstanding weathering resistance for exterior steel structures. Resistant to UV, salt spray, freeze-thaw and acid-alkali exposure. Sa2.5 prep, 1.7–3.2mm application thickness.
2K epoxy sealer primer engineered for deep penetration and encapsulation of concrete and cement substrates. Seals and stabilizes surfaces to optimize adhesion for subsequent coating systems. Surface dry in 1 hour, full cure in 7 days.
2K C6-modified epoxy MIO intermediate coat engineered to extend coating service life on marine and offshore structures. Pairs with epoxy zinc primer for layered cathodic and barrier protection. 50µm DFT, Sa2.5 prep.
Industrial anti-corrosion and protective coating manufacturer. Direct supply from factory — no agents. ISO 9001 certified. Exporting to 30+ countries.
