PLH52-6 Solvent-Free Conductive Anti-Static Epoxy Coating

Overview
Two-component solvent-free conductive anti-static epoxy coating for internal linings of fuel tanks and compartments.​

Composition
Low-viscosity epoxy resin, imported modified curing agent, conductive pigments, and additives; supplied as Part A & Part B.​

Typical uses
Internal lining anti-corrosion for compartments and oil storage tanks handling gasoline, diesel, kerosene, and engine oil.​

Technical data (typical)

• Appearance: grey or light grey.​

• Theoretical consumption: 0.14 kg/m² at 100 µm DFT (loss not included).​

• Density: 1.4 kg/L.​

• Drying time (25°C): surface dry 1 h; hard dry 24 h; full cure 7 d.​

Application data (25°C)

• Mixing ratio (A:B): 20:5.​

• Induction time: 5 min.​

• Pot life: 50 min.​

• Application methods: airless spray, brush, roller.​

• Thinner: use none/minimal; if air pressure is insufficient, X-7 epoxy thinner may be used.​

• Recoat interval: min 12 h; max 7 d.​

• Recommended DFT per coat: 90–120 µm (brush 40–50 µm).​

• System compatibility: solvent-free conductive anti-static epoxy coating.​

Surface preparation
Steel: blast to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.​

System compatibility / packing / storage

• Packing: Part A 20 kg; Part B 5 kg.​

• Storage: dry, cool, ventilated; away from fire; avoid strong sunlight; no outdoor storage.​

• Shelf life: 12 months.