- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
2K epoxy glass flake topcoat engineered for immersion service on submerged steel and concrete in chemical and marine environments. Abrasion-resistant with outstanding water barrier performance. 150µm DFT per airless spray pass.
PLH52-3 Epoxy Glass Flake Topcoat is a two-component epoxy glass flake topcoat with resistance to water and permeation of chemical media, used for long-term heavy-duty corrosion protection. This coating is intended for steel structures and concrete facilities in underwater or humid environments and heavy chemical areas, and it may also be used as an intermediate coat.
It is composed of epoxy resin, glass flakes, pigments, additives, and solvents, with a modified amine curing agent, and is supplied as Part A and Part B.
Resistant to water.
Resistant to permeation of chemical media.
Suitable for long-term heavy-duty corrosion protection.
Suitable for underwater or humid environments.
Suitable for heavy chemical areas.
Can be used as a topcoat or as an intermediate coat.
This coating is suitable for a wide range of steel and concrete protection projects in industrial and marine environments.
Steel structures in underwater environments.
Steel structures in humid environments.
Steel structures in heavy chemical areas.
Concrete facilities in underwater environments.
Concrete facilities in humid environments.
Concrete facilities in heavy chemical areas.
Over a two-component primer, the surface must be clean, dry, and free of contaminants; abrade if maximum recoat interval is exceeded. As first coat on steel, blast to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
Storage
Store in a dry, cool, ventilated place away from ignition sources and direct sunlight; no outdoor storage.
Compatible undercoats include epoxy glass flake anti-rust coating and epoxy anti-rust coating. Other compatible undercoats may also be used where applicable.
This product is a two-component epoxy glass flake topcoat supplied as Part A and Part B.
This coating is designed for steel structures and concrete facilities.
Yes. This coating may also be used as an intermediate coat.
This coating can be applied by airless spray, brush, or roller.
The recommended dry film thickness is 60–80 µm per coat, or 30–50 µm per coat by brush/roller.
This coating is stated as suitable for underwater or humid environments and heavy chemical areas.
We would love to speak with you.
Feel free to reach out using the below details.
Cementitious hydrocarbon fire-resistant coating engineered for petrochemical and oil refining facilities exposed to hydrocarbon flame. Impact-resistant and crack-resistant with outstanding weathering performance. Sa2.5 prep, 24–33mm total application thickness.
2K epoxy zinc phosphate primer with outstanding saltwater resistance and adhesion for heavy industrial applications. Engineered for port facilities, mining equipment & hydraulic steel in aggressive environments. Sa2.5 prep required, iron red or gray finish.
2K epoxy anti-corrosive primer that chemically reacts with surface corrosion to form a stable protective complex. Applies directly to corroded steel up to 60µm, minimizing surface preparation. Minimum 40µm DFT, universal topcoat compatibility.
Industrial anti-corrosion and protective coating manufacturer. Direct supply from factory — no agents. ISO 9001 certified. Exporting to 30+ countries.
